Control arm from VAICO for NISSAN ALMERA
Wishbone VAICO for all NISSAN ALMERA car models
Almera II Hatchback (N16)
Almera Tino (V10)
Almera II Saloon (N16)
Almera I Saloon (N15)
Almera I Hatchback (N15)
Almera Classic Saloon (B10)
Almera Saloon (N17)
Almera IV (N18_)
Best producers of high-quality Control arm for NISSAN ALMERA
Other car parts for Suspension
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for NISSAN ALMERA
QASHQAI
MICRA
X-TRAIL
JUKE
NOTE
NAVARA
PULSAR
PATROL
NV200
PATHFINDER
LEAF
PRIMERA
Most wanted products in Control arm VAICO for your NISSAN ALMERA
Suspension arm VAICO
- Fitting Position: Right, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0115
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 9,3
- Packaging height [cm]: 34,1
- Packaging Depth [cm]: 23,5
- Condition: new
VAICO | V46-0114
£ 29,76
Condition: new
Suspension arm VAICO
- Fitting Position: Upper, Front Axle Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 14,9
- paired article number: V30-4461
- Thread Size 1: MM15X1,5R
- Rod/Strut: Push Rod
- Condition: new
VAICO | V30-4462
£ 137,26
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 24
- paired article number: V30-4459
- Rod/Strut: Push Rod
- Condition: new
VAICO | V30-4460
£ 176,70
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Left
- Material: Steel, Cast Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 22
- paired article number: V40-2355
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Condition: new
VAICO | V40-2356
£ 95,89
Condition: new
Suspension arm VAICO
- Fitting Position: Upper, Front Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 14,9
- paired article number: V30-4462
- Thread Size 1: MM15X1,5R
- Rod/Strut: Push Rod
- Condition: new
VAICO | V30-4461
£ 137,26
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: V30-4460
- Rod/Strut: Push Rod
- Condition: new
VAICO | V30-4459
£ 161,28
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0114
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 9,3
- Packaging height [cm]: 34,1
- Packaging Depth [cm]: 24
- Condition: new
VAICO | V46-0115
£ 31,30
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Right
- Material: Cast Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 17,5
- Supplementary Info: Original VAICO Quality
- Cone Pitch: 1/5
- paired article number: V46-0544
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 33,2
- Packaging height [cm]: 9
- Packaging Depth [cm]: 61,9
- Condition: new
VAICO | V46-0545
£ 99,13
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Left, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Triangular Control Arm (CV)
- paired article number: V46-1692
- for OE number: 54 50 178 50R
- Condition: new
VAICO | V46-1691
£ 79,98
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Cast Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0549
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 47,5
- Packaging height [cm]: 9,5
- Packaging Depth [cm]: 44
- Condition: new
VAICO | V40-0548
£ 104,45
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Left
- Material: Cast Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 17,5
- Supplementary Info: Original VAICO Quality
- Cone Pitch: 1/5
- paired article number: V46-0545
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 44,6
- Packaging height [cm]: 9
- Packaging Depth [cm]: 48
- Condition: new
VAICO | V46-0544
£ 100,97
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Right
- Material: Steel, Cast Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 22
- paired article number: V40-2356
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Condition: new
VAICO | V40-2355
£ 103,99
Condition: new
