Control arm from VAICO for MICROCAR MC
Wishbone VAICO for all MICROCAR MC car models
MC Hatchback
Best producers of high-quality Control arm for MICROCAR MC
Other car parts for Suspension
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for MICROCAR MC
M.GO- VIRGO
- DUE
Most wanted products in Control arm VAICO for your MICROCAR MC
Suspension arm VAICO
- Fitting Position: Left, Upper Front Axle
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V24-7106
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 17,4
- Packaging height [cm]: 9,1
- Packaging Depth [cm]: 19,5
- Condition: new
VAICO | V24-7105
£ 30,19
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0504
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 37
- Packaging height [cm]: 7
- Packaging Depth [cm]: 37
- Condition: new
VAICO | V40-0505
£ 55,46
Condition: new
Suspension arm VAICO
- Fitting Position: both sides, Rear Axle Upper, Rear
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Overall Length [mm]: 338
- Supplementary Info: Original VAICO Quality
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Weight [kg]: 1,218
- Rod/Strut: Push Rod
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 10
- Packaging height [cm]: 7
- Packaging Depth [cm]: 41
- Condition: new
VAICO | V20-9511
£ 25,82
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Left
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V20-0294
- Thread Size 1: M12x1,5
- Thread Size 2: M14x1,5
- Supplementary Article / Supplementary Info Info 2: without rubber mount(s)
- Weight [kg]: 2,98
- Vehicle Equipment: for vehicles with Xenon light, for vehicles without xenon light
- Supplementary Article / Supplementary Info: without holder
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38,1
- Packaging height [cm]: 14,4
- Condition: new
VAICO | V20-0293
£ 64,26
Condition: new
Suspension arm VAICO
- Fitting Position: Upper, Rear Axle
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 283
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Mounting Type: Rubber Mount
- Condition: new
VAICO | V58-0054
£ 48,21
Condition: new
Suspension arm VAICO
- Fitting Position: Lower Front Axle, Right
- Material: Cast Steel, Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V42-0031
- Thread Size: Pinch Bolt 18mm
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Width [mm]: 375,0
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 36,8
- Packaging height [cm]: 6,55
- Condition: new
VAICO | V42-0032
£ 39,98
Condition: new
Suspension arm VAICO
- Fitting Position: Right, Lower Front Axle
- Material: Grey Cast Iron, Steel
- Control/Trailing Arm Type: Control Arm
- Overall Length [mm]: 410
- Supplementary Info: Original VAICO Quality
- paired article number: V30-0771
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Width [mm]: 85,0
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 14
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 50
- Condition: new
VAICO | V30-0772
£ 41,13
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V22-0040
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 6,5
- Packaging height [cm]: 7,8
- Packaging Depth [cm]: 12,5
- Condition: new
VAICO | V22-0041
£ 36,34
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0114
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 9,3
- Packaging height [cm]: 34,1
- Packaging Depth [cm]: 24
- Condition: new
VAICO | V46-0115
£ 31,35
Condition: new
Suspension arm VAICO
- Fitting Position: Rear Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Trailing Arm
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 16,7
- Packaging height [cm]: 5,2
- Packaging Depth [cm]: 36
- Condition: new
VAICO | V10-3431
£ 28,58
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 32
- Packaging height [cm]: 4
- Packaging Depth [cm]: 38
- Condition: new
VAICO | V10-7160
£ 39,01
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0097
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 41,5
- Packaging height [cm]: 49
- Condition: new
VAICO | V46-0098
£ 33,24
Condition: new
