Control arm from VAICO for ISUZU IMPULSE
Wishbone VAICO for all ISUZU IMPULSE car models
Impulse Coupe
Best producers of high-quality Control arm for ISUZU IMPULSE
Other car parts for Suspension
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for ISUZU IMPULSE
D-MAX
TROOPER
KB- ELF
- MU-X
- PICKUP
- TFR
- CAMPO
GEMINI
Most wanted products in Control arm VAICO for your ISUZU IMPULSE
Suspension arm VAICO
- Fitting Position: Right Front, Lower Front Axle
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- paired article number: V20-7159-1
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Alternatively
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 15,9
- Packaging height [cm]: 8,5
- Packaging Depth [cm]: 46,6
- Condition: new
VAICO | V20-7160-1
£ 52,19
Condition: new
Suspension arm VAICO
- Fitting Position: both sides, Rear Axle Upper, Rear
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Overall Length [mm]: 338
- Supplementary Info: Original VAICO Quality
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Weight [kg]: 1,218
- Rod/Strut: Push Rod
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 10
- Packaging height [cm]: 7
- Packaging Depth [cm]: 41
- Condition: new
VAICO | V20-9511
£ 25,41
Condition: new
Suspension arm VAICO
- Fitting Position: Upper, Rear Axle
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 283
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Mounting Type: Rubber Mount
- Condition: new
VAICO | V58-0054
£ 47,95
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0463
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 41
- Packaging height [cm]: 6
- Packaging Depth [cm]: 35
- Condition: new
VAICO | V40-0462
£ 52,44
Condition: new
Suspension arm VAICO
- Fitting Position: Right, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0115
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 9,3
- Packaging height [cm]: 34,1
- Packaging Depth [cm]: 23,5
- Condition: new
VAICO | V46-0114
£ 29,65
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle Right
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0446
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Weight [kg]: 2,98
- Supplementary Article / Supplementary Info: with bush
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 34,35
- Packaging height [cm]: 33,1
- Condition: new
VAICO | V40-0445
£ 72,20
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0462
- Weight [kg]: 3,397
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 41
- Packaging height [cm]: 6
- Packaging Depth [cm]: 35
- Condition: new
VAICO | V40-0463
£ 52,77
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Right
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Height [mm]: 130
- Supplementary Info: Original VAICO Quality
- paired article number: V20-0293
- Thread Size 1: M12x1,5
- Thread Size 2: M14x1,5
- Supplementary Article / Supplementary Info Info 2: without rubber mount(s)
- Weight [kg]: 3,018
- Vehicle Equipment: for vehicles with Xenon light, for vehicles without xenon light
- Supplementary Article / Supplementary Info: without holder
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 37,7
- Packaging height [cm]: 14,7
- Condition: new
VAICO | V20-0294
£ 63,66
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V46-0114
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 9,3
- Packaging height [cm]: 34,1
- Packaging Depth [cm]: 24
- Condition: new
VAICO | V46-0115
£ 31,18
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Upper Front Axle
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V24-7106
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 17,4
- Packaging height [cm]: 9,1
- Packaging Depth [cm]: 19,5
- Condition: new
VAICO | V24-7105
£ 30,02
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Front Axle
- Material: Cast Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V10-7239
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38
- Packaging height [cm]: 5,5
- Packaging Depth [cm]: 42
- Condition: new
VAICO | V10-7238
£ 50,13
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Left
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V20-0294
- Thread Size 1: M12x1,5
- Thread Size 2: M14x1,5
- Supplementary Article / Supplementary Info Info 2: without rubber mount(s)
- Weight [kg]: 2,98
- Vehicle Equipment: for vehicles with Xenon light, for vehicles without xenon light
- Supplementary Article / Supplementary Info: without holder
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38,1
- Packaging height [cm]: 14,4
- Condition: new
VAICO | V20-0293
£ 63,91
Condition: new
