Control arm from OPTIMAL for DAIMLER XJ
Wishbone OPTIMAL for all DAIMLER XJ car models
Daimler XJ (X30)
XJ Saloon (XJ40, XJ81)
Daimler (XJ4_)
Best producers of high-quality Control arm for DAIMLER XJ
Other car parts for Suspension
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for DAIMLER XJ
DART- V8
- LIMOUSINE
- 2.8 - 5.3
- SUPER EIGHT
Most wanted products in Control arm OPTIMAL for your DAIMLER XJ
Link Set, wheel suspen...
- Fitting Position: Rear Axle, Right, Left
- Control/Trailing Arm Type: Control Arm
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Slim Set
- Rod/Strut: Push Rod, Pull Rod, Camber Link
- Quantity Unit: Set
- Condition: new
OPTIMAL | G8-575
£ 100,20
Condition: new
Suspension arm OPTIMAL
- Fitting Position: Right, Lower, Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: G6-2066
- External Thread [mm]: M12 x 1,25 RHT M
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Mounting points diameter [mm]: 14,2
- Cone Size 1 [mm]: 13,4
- Cone Size 2 [mm]: 16,5
- Condition: new
OPTIMAL | G6-2067
£ 121,47
Condition: new
Suspension arm OPTIMAL
- Fitting Position: Lower, Front Axle, Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: G6-1218
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Mounting points diameter [mm]: 14,3, 14,4
- Bolt Head Diameter [mm]: 16,45
- Condition: new
OPTIMAL | G6-1219
£ 98,12
Condition: new
Suspension arm OPTIMAL
- Fitting Position: Lower, Front Axle, Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 15,5
- paired article number: G6-1554
- External Thread [mm]: M12 x 1,25 RHT M
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Supplementary Article / Supplementary Info: with holder
- Mounting points diameter [mm]: 12,2, 17,3
- Bore Diameter [mm]: 11,5
- Condition: new
OPTIMAL | G6-1553
£ 183,35
Condition: new
Suspension arm OPTIMAL
- Fitting Position: Rear, Right, Lower, Front Axle
- Material: Cast Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: G5-996
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Required quantity: 1
- Article number of recommended accessories: G3-2016S
- Condition: new
OPTIMAL | G5-997
£ 72,11
Condition: new
Suspension arm OPTIMAL
- Fitting Position: Right, Lower, Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 14,9
- paired article number: G6-1357
- External Thread [mm]: M12 x 1,50 RHT M
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Mounting points diameter [mm]: 12,2, 13,2
- Quantity Unit: Set
- Mounting Type: Pre-assembled
- Alternative Repair Kit: G6-1356
- Condition: new
OPTIMAL | G6-1358
£ 173,96
Condition: new
Suspension arm OPTIMAL
- Fitting Position: Right, Lower, Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: G6-114
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Mounting points diameter [mm]: 10,2
- Bolt Head Diameter [mm]: 19
- Mounting Type: Pre-assembled
- Condition: new
OPTIMAL | G6-115
£ 177,64
Condition: new
Suspension arm OPTIMAL
- Fitting Position: Lower, Front Axle, Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 14,9
- paired article number: G6-1409
- External Thread [mm]: M12 x 1,50 RHT M
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Quantity Unit: Set
- Condition: new
OPTIMAL | G6-1408
£ 198,38
Condition: new
Suspension arm OPTIMAL
- Fitting Position: Rear Axle, Rear, Lower, both sides
- Material: Cast Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 257
- Cone Size [mm]: 11,3
- External Thread [mm]: M10 x 1,50 RHT M
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount, with fastening material
- Required quantity: 2
- Mounting Type: Rubber-Metal Mount
- Mounting points diameter [mm]: 12,2
- Alternative Repair Kit: G5-831
- Condition: new
OPTIMAL | G5-874
£ 66,58
Condition: new
Suspension arm OPTIMAL
- Fitting Position: Front Axle, Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 16,3, 18,9
- paired article number: G6-1531S2
- External Thread 1 [mm]: M14 x 1,50 RHT M
- External Thread 2 [mm]: M12 x 1,50 RHT M
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Mounting points diameter [mm]: 17
- Alternative Repair Kit: G6-1530, G6-1530S1
- Condition: new
OPTIMAL | G6-1530S2
£ 167,58
Condition: new
Suspension arm OPTIMAL
- Fitting Position: Right, Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 16,3, 18,9
- paired article number: G6-1530S2
- External Thread 1 [mm]: M14 x 1,50 RHT M
- External Thread 2 [mm]: M12 x 1,50 RHT M
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Mounting points diameter [mm]: 17
- Alternative Repair Kit: G6-1531, G6-1531S1
- Condition: new
OPTIMAL | G6-1531S2
£ 167,58
Condition: new
Suspension arm OPTIMAL
- Fitting Position: Lower, Front, Front Axle, both sides
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- External Thread [mm]: M14 x 1,50 RHT M
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount, without fastening material
- Required quantity: 2
- Mounting points diameter [mm]: 14,3
- Bolt Head Diameter [mm]: 14,05
- Condition: new
OPTIMAL | G5-2105
£ 182,69
Condition: new
