Control arm from VAICO for CHEVROLET CHEVELLE
Wishbone VAICO for all CHEVROLET CHEVELLE car models
Chevelle III Saloon
Chevelle III Estate
Best producers of high-quality Control arm for CHEVROLET CHEVELLE
Other car parts for Suspension
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for CHEVROLET CHEVELLE
CAPTIVA
SPARK
AVEO
CRUZE
ORLANDO
MATIZ
LACETTI
CORVETTE
CAMARO
TRAX
SILVERADO
KALOS
EPICA
Most wanted products in Control arm VAICO for your CHEVROLET CHEVELLE
Suspension arm VAICO
- Fitting Position: Lower Front Axle, Right
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0897
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 35
- Packaging height [cm]: 8,5
- Packaging Depth [cm]: 39
- Condition: new
VAICO | V40-0898
£ 88,46
Condition: new
Suspension arm VAICO
- Fitting Position: Left, Lower Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0497
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 38
- Packaging height [cm]: 7,5
- Packaging Depth [cm]: 40,4
- Condition: new
VAICO | V40-0496
£ 49,18
Condition: new
Suspension arm VAICO
- Fitting Position: both sides, Lower Front Axle
- Material: Cast Steel
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 284
- Supplementary Info: Original VAICO Quality
- Quantity Unit: Piece
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 8,6
- Packaging height [cm]: 5,7
- Packaging Depth [cm]: 32,6
- Condition: new
VAICO | V40-0428
£ 36,71
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V51-0071
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 29,7
- Packaging height [cm]: 7
- Packaging Depth [cm]: 44,8
- Condition: new
VAICO | V51-0070
£ 52,39
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle Left
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V51-0072
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Mounting Type: Hydro Mount
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 18,5
- Packaging height [cm]: 8,3
- Packaging Depth [cm]: 36,3
- Condition: new
VAICO | V51-0073
£ 94,78
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 15,2
- Cone Pitch: 1/6
- paired article number: V40-1587
- Axle alignment required after fitting
- Condition: new
VAICO | V40-1586
£ 73,43
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Right, Lower
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 15,2
- Cone Pitch: 1/6
- paired article number: V40-1586
- Axle alignment required after fitting
- Condition: new
VAICO | V40-1587
£ 77,05
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V51-0017
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 37,5
- Packaging height [cm]: 8,3
- Packaging Depth [cm]: 46,1
- Condition: new
VAICO | V51-0016
£ 45,49
Condition: new
Suspension arm VAICO
- Fitting Position: Right, Lower, Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0496
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 1,85
- Packaging height [cm]: 1,45
- Packaging Depth [cm]: 3,9
- Condition: new
VAICO | V40-0497
£ 44,28
Condition: new
Suspension arm VAICO
- Fitting Position: Front Axle Left
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 20
- paired article number: V40-1854
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 37
- Packaging height [cm]: 8,3
- Packaging Depth [cm]: 43,2
- Condition: new
VAICO | V40-1855
£ 126,47
Condition: new
Suspension arm VAICO
- Fitting Position: Lower Front Axle, Left
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-0898
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 35
- Packaging height [cm]: 8,5
- Packaging Depth [cm]: 39
- Condition: new
VAICO | V40-0897
£ 91,28
Condition: new
Suspension arm VAICO
- Fitting Position: Lower, Front Axle Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Supplementary Info: Original VAICO Quality
- paired article number: V40-1276
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 32,5
- Packaging height [cm]: 7
- Packaging Depth [cm]: 51,5
- Condition: new
VAICO | V40-1275
£ 40,71
Condition: new
Top CHEVROLET CHEVELLE models
