Steering rack from LAUBER for TRIUMPH HERALD
Rack and pinion LAUBER for all TRIUMPH HERALD car models
Herald Saloon
Herald Convertible
Herald Estate
Best producers of high-quality Steering rack for TRIUMPH HERALD
Other car parts for Steering
Track rod end
Inner tie rod
Tie rod
Steering rack boot
Power steering pump
Hydraulic oil
Choice of other autoparts from the Steering category for TRIUMPH HERALD
TR- STAG
- SPITFIRE
- DOLOMITE
- 2000
- ACCLAIM
- VITESSE
- GT6
- 1300
- 2.5 PI
- 1500
Most wanted products in Steering rack LAUBER for your TRIUMPH HERALD
Steering rack LAUBER
- Operating Mode: Hydraulic
- Condition: Remanufactured
LAUBER | 66.2922
£ 298,66
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Manual
- Steering Gear Type: Rack and Pinion Steering Gear
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Exchange Part
- Total Length [mm]: 1188
- Manufacturer Restriction: DELPHI
- Axle Joint Thread Size: M12x1,5
- Overall Length [mm]: 1188
- Condition: Remanufactured
LAUBER | 69.4040
£ 120,21
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: VISTEON
- Exchange Part
- Overall Length [mm]: 1280
- Condition: Remanufactured
LAUBER | 66.1564
£ 286,78
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Steering Gear Type: Rack and Pinion Steering Gear
- Manufacturer Restriction: JTEKT
- Overall Length [mm]: 1060
- Input shaft height [mm]: 85
- Input Shaft Diameter [mm]: 18,5
- Number of mounting bores: 2
- External Thread [mm]: M14 x 1.5
- Stroke [mm]: 170
- Code Letter: 60DHKM, 60LYAM
- Observe service information
- Exchange Part
- Axle Joint Thread Size: M14x1,5
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.4147
£ 231,21
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Overall Length [mm]: 1175
- Input shaft height [mm]: 35
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M14x1,5
- Connector type: trojkatny
- Condition: Remanufactured
LAUBER | 66.0584
£ 216,18
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Internal Thread [mm]: M14 x 1.5mm MALE
- Exchange Part
- Manufacturer Restriction: SMI
- Overall Length [mm]: 1090
- Input shaft height [mm]: 45
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M14x1,5
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.9042
£ 287,66
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Overall Length [mm]: 1180
- Exchange Part
- Plug Type ID: VALEO
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Connector type: verzahnt
- Axle Joint Thread Size: M14x1,5
- Input shaft height [mm]: 64
- Number of Teeth on input shaft: 22
- Condition: Remanufactured
LAUBER | 66.9289
£ 212,76
Condition: Remanufactured
Steering rack LAUBER
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Operating Mode: Hydraulic
- Observe service information
- Condition: new
LAUBER | 66.0034
£ 254,11
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Manufacturer Restriction: TRW
- Axle Joint Thread Size: M14x1,5
- Overall Length [mm]: 1210
- Input shaft height [mm]: 60
- Number of Teeth on input shaft: 22
- Connector type: sciety
- Condition: Remanufactured
LAUBER | 66.9389
£ 209,70
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Manual
- Internal Thread [mm]: 1/2" UNF MALE
- Condition: Remanufactured
LAUBER | 69.0505
£ 64,93
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: KOYO
- Axle Joint Thread Size: M16x1,5
- Overall Length [mm]: 1200
- Input shaft height [mm]: 50
- Number of Teeth on input shaft: 36
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.6551
£ 317,63
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: VISTEON
- Exchange Part
- Steering Gear Type: Rack and Pinion Steering Gear
- Condition: Remanufactured
LAUBER | 66.1584
£ 255,65
Condition: Remanufactured
Top TRIUMPH HERALD models
- TRIUMPH Herald Saloon steering rack
- TRIUMPH Herald Convertible steering rack
- TRIUMPH Herald Estate steering rack
