Steering rack from LAUBER for TALBOT EXPRESS
Rack and pinion LAUBER for all TALBOT EXPRESS car models
Express 1000-1800 Van
Express 1000-1500 Platform / Chassis
Express 1000-1500 Minibus
Best producers of high-quality Steering rack for TALBOT EXPRESS
Other car parts for Steering
Track rod end
Inner tie rod
Tie rod
Steering rack boot
Power steering pump
Hydraulic oil
Choice of other autoparts from the Steering category for TALBOT EXPRESS
SIMCA- SAMBA
- MURENA
- MATRA BAGHEERA
- HORIZON
- AVENGER
- SOLARA
- 1307-1510
- RANCHO
- 180
Most wanted products in Steering rack LAUBER for your TALBOT EXPRESS
Steering rack LAUBER
- Operating Mode: Hydraulic
- Vehicle Equipment: for vehicles without servotronic steering
- Observe service information
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1175
- Input shaft height [mm]: 60
- Axle Joint Thread Size: M14x1,5
- Number of Teeth on input shaft: 54
- Connector type: wielorowek
- Condition: new
LAUBER | 66.0018
£ 441,34
Condition: new
Steering rack LAUBER
- Operating Mode: Electronic
- Steering Gear Type: Rack and Pinion Steering Gear
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: BOSCH
- Axle Joint Thread Size: M14x1.5
- Overall Length [mm]: 1210
- Input shaft height [mm]: 150
- Connector type: klin
- Condition: new
LAUBER | 66.9996
£ 299,11
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Supplementary Article / Supplementary Info Info 2: without coupling rod
- Internal Thread [mm]: M14 x 1.5mm MALE
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Steering Gear Type: Rack and Pinion Steering Gear
- Overall Length [mm]: 1260
- Input shaft height [mm]: 48
- Manufacturer Restriction: ZF
- Axle Joint Thread Size: M14x1,5
- Number of Teeth on input shaft: 22
- Connector type: sciety
- Condition: Remanufactured
LAUBER | 66.0747
£ 273,11
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Length [mm]: 1235
- Axle Joint Thread Size: M14
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1235
- Manufacturer Restriction: TRW
- Input shaft height [mm]: 55
- Number of Teeth on input shaft: 22
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.1950
£ 275,58
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Manufacturer Restriction: TRW
- Axle Joint Thread Size: M14x1,5
- Overall Length [mm]: 1210
- Input shaft height [mm]: 60
- Number of Teeth on input shaft: 22
- Connector type: sciety
- Condition: Remanufactured
LAUBER | 66.9389
£ 208,95
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Internal Thread [mm]: M16 x 1.5mm MALE
- Exchange Part
- Overall Length [mm]: 1040
- Number of Teeth: 54
- Number of Teeth on input shaft: 54
- Manufacturer Restriction: ZF
- Input shaft height [mm]: 40
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M16x1,5
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.0922
£ 379,78
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1230
- Input shaft height [mm]: 65
- Axle Joint Thread Size: M14x1,5
- Connector type: sciety
- Condition: Remanufactured
LAUBER | 66.1300
£ 246,74
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: VISTEON
- Exchange Part
- Steering Gear Type: Rack and Pinion Steering Gear
- Condition: Remanufactured
LAUBER | 66.1584
£ 254,74
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Overall Length [mm]: 1180
- Exchange Part
- Plug Type ID: VALEO
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Connector type: verzahnt
- Axle Joint Thread Size: M14x1,5
- Input shaft height [mm]: 64
- Number of Teeth on input shaft: 22
- Condition: Remanufactured
LAUBER | 66.9289
£ 212,39
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Overall Length [mm]: 1165
- for steering manufacturer: TRW
- Axle Joint Thread Size: 12
- Input shaft connector type: toothed
- Number of Teeth on input shaft: 36
- Input shaft height [mm]: 29,6
- Input Shaft Diameter [mm]: 17,5
- Thread Size: M14x1,5/M16x1,5
- Steering Gear Type: Rack and Pinion Steering Gear
- Manufacturer Restriction: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Connector type: wielorowek
- Condition: new
LAUBER | 66.5893
£ 232,88
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Internal Thread [mm]: M16 x 1.5mm MALE
- Exchange Part
- Manufacturer Restriction: SMI
- Overall Length [mm]: 1250
- Input shaft height [mm]: 80
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M16x1,5
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.0799
£ 341,86
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Condition: Remanufactured
LAUBER | 66.2922
£ 297,60
Condition: Remanufactured
