Steering rack from LAUBER for LOTUS ELITE
Rack and pinion LAUBER for all LOTUS ELITE car models
Elite Coupe
Best producers of high-quality Steering rack for LOTUS ELITE
Other car parts for Steering
Track rod end
Inner tie rod
Tie rod
Steering rack boot
Power steering pump
Hydraulic oil
Choice of other autoparts from the Steering category for LOTUS ELITE
ELISE- ESPRIT
- ELAN
- EVORA
- EXCEL
- EUROPA
- EMIRA
- EXIGE
- ECLAT
- SEVEN
Most wanted products in Steering rack LAUBER for your LOTUS ELITE
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Condition: Remanufactured
LAUBER | 66.2929
£ 337,25
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: VISTEON
- Exchange Part
- Steering Gear Type: Rack and Pinion Steering Gear
- Condition: Remanufactured
LAUBER | 66.1584
£ 255,68
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Manufacturer Restriction: SMI
- Overall Length [mm]: 1060
- Axle Joint Thread Size: M14x1,5
- Input shaft height [mm]: 60
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.9083
£ 217,87
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Manual
- Steering Gear Type: Rack and Pinion Steering Gear
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Exchange Part
- Total Length [mm]: 1188
- Manufacturer Restriction: DELPHI
- Axle Joint Thread Size: M12x1,5
- Overall Length [mm]: 1188
- Condition: Remanufactured
LAUBER | 69.4040
£ 120,23
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Length [mm]: 1235
- Axle Joint Thread Size: M14
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1235
- Manufacturer Restriction: TRW
- Input shaft height [mm]: 55
- Number of Teeth on input shaft: 22
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.1950
£ 276,61
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: VISTEON
- Exchange Part
- Overall Length [mm]: 1280
- Condition: Remanufactured
LAUBER | 66.1564
£ 286,81
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Overall Length [mm]: 1170
- Input shaft height [mm]: 40
- Axle Joint Thread Size: M14x1,5
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.0811
£ 265,38
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Manufacturer Restriction: ZF
- Overall Length [mm]: 1190
- Input shaft height [mm]: 30
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M16x1,5
- Number of Teeth on input shaft: 54
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.3811
£ 390,60
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Manual
- Steering Gear Type: Rack and Pinion Steering Gear
- Condition: Remanufactured
LAUBER | 69.9015
£ 51,99
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Manufacturer Restriction: TRW
- Axle Joint Thread Size: M14x1,5
- Overall Length [mm]: 1210
- Input shaft height [mm]: 60
- Number of Teeth on input shaft: 22
- Connector type: sciety
- Condition: Remanufactured
LAUBER | 66.9389
£ 209,72
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Supplementary Article / Supplementary Info Info 2: without coupling rod
- Internal Thread [mm]: M14 x 1.5mm MALE
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Steering Gear Type: Rack and Pinion Steering Gear
- Overall Length [mm]: 1260
- Input shaft height [mm]: 48
- Manufacturer Restriction: ZF
- Axle Joint Thread Size: M14x1,5
- Number of Teeth on input shaft: 22
- Connector type: sciety
- Condition: Remanufactured
LAUBER | 66.0747
£ 274,12
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1230
- Input shaft height [mm]: 65
- Axle Joint Thread Size: M14x1,5
- Connector type: sciety
- Condition: Remanufactured
LAUBER | 66.1300
£ 247,65
Condition: Remanufactured
