Steering rack from TRW for LAMBORGHINI GALLARDO
Rack and pinion TRW for all LAMBORGHINI GALLARDO car models
Gallardo Coupe
Gallardo Spyder
Best producers of high-quality Steering rack for LAMBORGHINI GALLARDO
Other car parts for Steering
Track rod end
Inner tie rod
Tie rod
Steering rack boot
Power steering pump
Hydraulic oil
Choice of other autoparts from the Steering category for LAMBORGHINI GALLARDO
HURACÁN- URUS
- AVENTADOR
DIABLO
MURCIÉLAGO- COUNTACH
- ESPADA
- URRACO
Most wanted products in Steering rack TRW for your LAMBORGHINI GALLARDO
Steering rack TRW
- Steering Gear Type: Rack and Pinion Steering Gear
- Operating Mode: Mechanical
- Vehicle Equipment: for vehicles without power steering
- Manufacturer Restriction: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Length [mm]: 574
- Observe technical data
- Exchange Part
- Condition: Remanufactured
TRW | JRM589
£ 132,96
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Mechanical
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Vehicle Equipment: for vehicles without steer angle limit
- Supplementary Article / Supplementary Info Info 2: with axle joint
- Manufacturer Restriction: DELPHI
- Overall Length [mm]: 1235
- Axle Joint Thread Size: M14x1,5
- Axle Joint Thread Type: External Thread
- Stroke [mm]: 155
- Input shaft height [mm]: 109
- Observe technical data
- Condition: new
TRW | JRM542
£ 349,68
Condition: new
Steering rack TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Operating Mode: Hydraulic
- Supplementary Article / Supplementary Info: with bush
- Support plate diameter [mm]: 10
- Manufacturer Restriction: ZF
- Observe technical data
- Condition: Remanufactured
TRW | JRP658
£ 638,65
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: THYSSEN KRUPP
- Vehicle Equipment: for vehicles with servotronic steering
- Supplementary Article / Supplementary Info Info 2: without sensor
- Observe technical data
- Condition: Remanufactured
TRW | JRP886
£ 467,29
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Mechanical
- Steering Gear Type: Rack and Pinion Steering Gear
- Manufacturer Restriction: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Length [mm]: 574
- Observe technical data
- Exchange Part
- Condition: Remanufactured
TRW | JRM590
£ 166,70
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Manufacturer Restriction: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1130
- Stroke [mm]: 160
- Input shaft height [mm]: 57
- Input Shaft Diameter [mm]: 17,6
- Number of Teeth on input shaft: 54
- Distance of mounting bores [mm]: 500
- Mounting points diameter [mm]: 12,2
- Axle Joint Length [mm]: 120
- Axle Joint Thread Size: M14x1,5
- Exchange Part
- Condition: new
TRW | JRP1404
£ 662,80
Condition: new
Steering rack TRW
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Vehicle Equipment: for vehicles with power steering, for vehicles with steering angle sensor at steering column
- Length [mm]: 627
- Observe technical data
- Condition: Remanufactured
TRW | JRP1228
£ 393,55
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Mechanical
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Thread Size: M12x1.25
- Observe technical data
- Condition: Remanufactured
TRW | JRM491
£ 191,16
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Manufacturer Restriction: THYSSEN-KRUPP
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Length [mm]: 1165
- Distance of mounting bores [mm]: 264
- Input shaft height [mm]: 30
- Input Shaft Diameter [mm]: 17,6
- Number of Teeth on input shaft: 54
- Stroke [mm]: 142
- Axle Joint Length [mm]: 145
- Axle Joint Thread Size: M14x1,5
- Exchange Part
- Condition: Remanufactured
TRW | JRP1401
£ 734,29
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Length [mm]: 827
- Overall Length [mm]: 1179
- Stroke [mm]: 145
- Input shaft height [mm]: 65
- Input Shaft Diameter [mm]: 15,1
- Input shaft connector type: toothed
- Number of Teeth on input shaft: 22
- Axle Joint Length [mm]: 175
- Axle Joint Thread Size: M14x1,5
- Pressure Line Connection Thread Size: M14x1,5
- Backflow Connector Thread Size: M16x1,5
- Observe technical data
- Exchange Part
- Condition: Remanufactured
TRW | JRP1301
£ 307,36
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Mechanical
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Length [mm]: 616
- Number of mounting bores: 2
- Distance of mounting bores [mm]: 412
- Input Shaft Diameter [mm]: 11
- Input shaft height [mm]: 30,5
- Input shaft connector type: toothed
- Exchange Part
- Observe technical data
- Condition: Remanufactured
TRW | JRM549
£ 139,30
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: THYSSEN-KRUPP
- Length [mm]: 1165
- Distance of mounting bores [mm]: 264
- Input shaft height [mm]: 30
- Input Shaft Diameter [mm]: 17,6
- Number of Teeth on input shaft: 54
- Stroke [mm]: 142
- Axle Joint Length [mm]: 145
- Axle Joint Thread Size: M14x1,5
- Exchange Part
- Condition: Remanufactured
TRW | JRP1402
£ 1106,25
Condition: Remanufactured
Top LAMBORGHINI GALLARDO models
