Steering rack from TRW for DAEWOO KORANDO
Rack and pinion TRW for all DAEWOO KORANDO car models
Korando Off-Road
Korando Off-Road Cabrio (KJ)
Best producers of high-quality Steering rack for DAEWOO KORANDO
Other car parts for Steering
Track rod end
Inner tie rod
Tie rod
Steering rack boot
Power steering pump
Hydraulic oil
Choice of other autoparts from the Steering category for DAEWOO KORANDO
MATIZ
LANOS
KALOS
NUBIRA
LACETTI
NEXIA- CIELO
TACUMA
LEGANZA
ESPERO
TICO
MUSSO- RACER
- TOSCA
LUBLIN
Most wanted products in Steering rack TRW for your DAEWOO KORANDO
Steering rack TRW
- Operating Mode: Mechanical
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Observe technical data
- Condition: Remanufactured
TRW | JRM472
£ 243,65
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Manufacturer Exclusion: ZF
- Supplementary Article / Supplementary Info Info 2: without axle joint
- Observe technical data
- Length [mm]: 557
- Input shaft height [mm]: 80
- Thread Size: M16x1.5
- Stroke [mm]: 65
- Condition: Remanufactured
TRW | JRP866
£ 403,93
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Mechanical
- Manufacturer Restriction: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Length [mm]: 701
- Condition: Remanufactured
TRW | JRM623
£ 365,76
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Manufacturer Restriction: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1130
- Stroke [mm]: 160
- Input shaft height [mm]: 57
- Input Shaft Diameter [mm]: 17,6
- Number of Teeth on input shaft: 54
- Distance of mounting bores [mm]: 500
- Mounting points diameter [mm]: 12,2
- Axle Joint Length [mm]: 120
- Axle Joint Thread Size: M14x1,5
- Exchange Part
- Condition: new
TRW | JRP1404
£ 662,19
Condition: new
Steering rack TRW
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Length [mm]: 827
- Overall Length [mm]: 1179
- Stroke [mm]: 145
- Input shaft height [mm]: 65
- Input Shaft Diameter [mm]: 15,1
- Input shaft connector type: toothed
- Number of Teeth on input shaft: 22
- Axle Joint Length [mm]: 175
- Axle Joint Thread Size: M14x1,5
- Pressure Line Connection Thread Size: M14x1,5
- Backflow Connector Thread Size: M16x1,5
- Observe technical data
- Exchange Part
- Condition: Remanufactured
TRW | JRP1301
£ 307,08
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Vehicle Equipment: for vehicles with power steering, for vehicles with steering angle sensor at steering column
- Length [mm]: 627
- Observe technical data
- Condition: Remanufactured
TRW | JRP1228
£ 393,00
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Mechanical
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1116
- Thread Size: M12x1,5
- Stroke [mm]: 128
- Distance of mounting bores [mm]: 167
- Input Shaft Diameter [mm]: 17
- Input shaft height [mm]: 113
- Input shaft connector type: untoothed
- Observe technical data
- Condition: Remanufactured
TRW | JRM526
£ 270,59
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Manufacturer Restriction: THYSSEN-KRUPP
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Length [mm]: 1165
- Distance of mounting bores [mm]: 264
- Input shaft height [mm]: 30
- Input Shaft Diameter [mm]: 17,6
- Number of Teeth on input shaft: 54
- Stroke [mm]: 142
- Axle Joint Length [mm]: 145
- Axle Joint Thread Size: M14x1,5
- Exchange Part
- Condition: Remanufactured
TRW | JRP1401
£ 733,62
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: THYSSEN-KRUPP
- Length [mm]: 1165
- Distance of mounting bores [mm]: 264
- Input shaft height [mm]: 30
- Input Shaft Diameter [mm]: 17,6
- Number of Teeth on input shaft: 54
- Stroke [mm]: 142
- Axle Joint Length [mm]: 145
- Axle Joint Thread Size: M14x1,5
- Exchange Part
- Condition: Remanufactured
TRW | JRP1402
£ 1105,23
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Mechanical
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Thread Size: M12x1.25
- Observe technical data
- Condition: Remanufactured
TRW | JRM491
£ 190,87
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: THYSSEN KRUPP
- Vehicle Equipment: for vehicles with servotronic steering
- Supplementary Article / Supplementary Info Info 2: without sensor
- Observe technical data
- Condition: Remanufactured
TRW | JRP886
£ 466,85
Condition: Remanufactured
Steering rack TRW
- Operating Mode: Hydraulic
- Manufacturer Restriction: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1140
- Input shaft height [mm]: 80
- Input shaft connector type: Rectangle
- Version: Generation II
- Observe technical data
- Condition: Remanufactured
TRW | JRP725
£ 342,70
Condition: Remanufactured
Top DAEWOO KORANDO models
