Steering rack from LAUBER for CHEVROLET TRAX
Rack and pinion LAUBER for all CHEVROLET TRAX car models
Trax I (U200)
Best producers of high-quality Steering rack for CHEVROLET TRAX
Other car parts for Steering
Track rod end
Inner tie rod
Tie rod
Steering rack boot
Power steering pump
Hydraulic oil
Choice of other autoparts from the Steering category for CHEVROLET TRAX
CAPTIVA
SPARK
AVEO
CRUZE
ORLANDO
MATIZ
LACETTI
CORVETTE
CAMARO
SILVERADO
KALOS
EPICA
Most wanted products in Steering rack LAUBER for your CHEVROLET TRAX
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering manufacturer: Mando
- Overall Length [mm]: 1210
- Manufacturer Restriction: Pinion Height 102mm
- Net weight [kg]: 7
- Condition: new
LAUBER | 66.7238
£ 265,94
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Vehicle Equipment: for vehicles without servotronic steering
- Overall Length [mm]: 1295
- for steering manufacturer: SAGINAW
- Input shaft connector type: untoothed
- Input shaft height [mm]: 50
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M14x1,5
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.5224
£ 391,01
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Manufacturer Restriction: TRW
- Axle Joint Thread Size: M14x1,5
- Overall Length [mm]: 1210
- Input shaft height [mm]: 60
- Number of Teeth on input shaft: 22
- Connector type: sciety
- Condition: Remanufactured
LAUBER | 66.9389
£ 209,70
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: VISTEON
- Exchange Part
- Overall Length [mm]: 1280
- Condition: Remanufactured
LAUBER | 66.1564
£ 286,78
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Supplementary Article / Supplementary Info Info 2: without coupling rod
- Internal Thread [mm]: M14 x 1.5mm MALE
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Steering Gear Type: Rack and Pinion Steering Gear
- Overall Length [mm]: 1260
- Input shaft height [mm]: 48
- Manufacturer Restriction: ZF
- Axle Joint Thread Size: M14x1,5
- Number of Teeth on input shaft: 22
- Connector type: sciety
- Condition: Remanufactured
LAUBER | 66.0747
£ 274,09
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Manufacturer Restriction: ZF
- Overall Length [mm]: 1190
- Input shaft height [mm]: 30
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M16x1,5
- Number of Teeth on input shaft: 54
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.3811
£ 391,37
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Internal Thread [mm]: M16 x 1.5mm MALE
- Exchange Part
- Overall Length [mm]: 1040
- Number of Teeth: 54
- Number of Teeth on input shaft: 54
- Manufacturer Restriction: ZF
- Input shaft height [mm]: 40
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M16x1,5
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.0922
£ 381,15
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Stroke [mm]: 184
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: KOYO
- Overall Length [mm]: 1182
- Input shaft height [mm]: 90
- Axle Joint Thread Size: M14x1,5
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.4146
£ 233,99
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Steering Gear Type: Rack and Pinion Steering Gear
- Manufacturer Restriction: JTEKT
- Overall Length [mm]: 1060
- Input shaft height [mm]: 85
- Input Shaft Diameter [mm]: 18,5
- Number of mounting bores: 2
- External Thread [mm]: M14 x 1.5
- Stroke [mm]: 170
- Code Letter: 60DHKM, 60LYAM
- Observe service information
- Exchange Part
- Axle Joint Thread Size: M14x1,5
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.4147
£ 231,21
Condition: Remanufactured
Steering rack LAUBER
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Operating Mode: Hydraulic
- Observe service information
- Condition: new
LAUBER | 66.0034
£ 254,11
Condition: new
Steering rack LAUBER
- Operating Mode: Manual
- Steering Gear Type: Rack and Pinion Steering Gear
- Condition: Remanufactured
LAUBER | 69.9015
£ 51,98
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Internal Thread [mm]: M14 x 1.5mm MALE
- Exchange Part
- Manufacturer Restriction: SMI
- Overall Length [mm]: 1090
- Input shaft height [mm]: 45
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M14x1,5
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.9042
£ 287,66
Condition: Remanufactured
