Steering rack from LAUBER for CADILLAC CTS
Rack and pinion LAUBER for all CADILLAC CTS car models
CTS I Saloon (GMX320)
CTS II Saloon (GMX322)
CTS II Coupe (GMX322)
CTS III Saloon (A1LL)
CTS II Sport Wagon (GMX322)
CTS III Coupe (A1LL)
CTS III Sport Wagon (A1LL)
Best producers of high-quality Steering rack for CADILLAC CTS
Other car parts for Steering
Track rod end
Inner tie rod
Tie rod
Steering rack boot
Power steering pump
Hydraulic oil
Choice of other autoparts from the Steering category for CADILLAC CTS
ESCALADE
BLS
SRX
SEVILLE
ATS- DEVILLE
ELDORADO- CT6
- XT4
- FLEETWOOD
- XT5
STS
Most wanted products in Steering rack LAUBER for your CADILLAC CTS
Steering rack LAUBER
- Operating Mode: Manual
- Steering Gear Type: Rack and Pinion Steering Gear
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Exchange Part
- Total Length [mm]: 1188
- Manufacturer Restriction: DELPHI
- Axle Joint Thread Size: M12x1,5
- Overall Length [mm]: 1188
- Condition: Remanufactured
LAUBER | 69.4040
£ 120,05
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Internal Thread [mm]: M14 x 1.5mm MALE
- Exchange Part
- Manufacturer Restriction: SMI
- Overall Length [mm]: 1090
- Input shaft height [mm]: 45
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M14x1,5
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.9042
£ 287,26
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Length [mm]: 1235
- Axle Joint Thread Size: M14
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1235
- Manufacturer Restriction: TRW
- Input shaft height [mm]: 55
- Number of Teeth on input shaft: 22
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.1950
£ 276,19
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Overall Length [mm]: 1165
- for steering manufacturer: TRW
- Axle Joint Thread Size: 12
- Input shaft connector type: toothed
- Number of Teeth on input shaft: 36
- Input shaft height [mm]: 29,6
- Input Shaft Diameter [mm]: 17,5
- Thread Size: M14x1,5/M16x1,5
- Steering Gear Type: Rack and Pinion Steering Gear
- Manufacturer Restriction: TRW
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Connector type: wielorowek
- Condition: new
LAUBER | 66.5893
£ 233,40
Condition: new
Steering rack LAUBER
- Operating Mode: Manual
- Internal Thread [mm]: 1/2" UNF MALE
- Condition: Remanufactured
LAUBER | 69.0505
£ 64,84
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: KOYO
- Axle Joint Thread Size: M16x1,5
- Overall Length [mm]: 1200
- Input shaft height [mm]: 50
- Number of Teeth on input shaft: 36
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.6551
£ 317,19
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Stroke [mm]: 184
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: KOYO
- Overall Length [mm]: 1182
- Input shaft height [mm]: 90
- Axle Joint Thread Size: M14x1,5
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.4146
£ 233,99
Condition: Remanufactured
Steering rack LAUBER
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Operating Mode: Hydraulic
- Observe service information
- Condition: new
LAUBER | 66.0034
£ 253,75
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1230
- Input shaft height [mm]: 65
- Axle Joint Thread Size: M14x1,5
- Connector type: sciety
- Condition: Remanufactured
LAUBER | 66.1300
£ 247,28
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Manufacturer Restriction: ZF
- Overall Length [mm]: 1190
- Input shaft height [mm]: 30
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M16x1,5
- Number of Teeth on input shaft: 54
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.3811
£ 392,94
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: VISTEON
- Exchange Part
- Steering Gear Type: Rack and Pinion Steering Gear
- Condition: Remanufactured
LAUBER | 66.1584
£ 255,30
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Condition: Remanufactured
LAUBER | 66.2929
£ 336,74
Condition: Remanufactured
