Steering rack from LAUBER for AUDI A2
Rack and pinion LAUBER for all AUDI A2 car models
A2 (8Z0)
Best producers of high-quality Steering rack for AUDI A2
Other car parts for Steering
Track rod end
Inner tie rod
Tie rod
Steering rack boot
Power steering pump
Hydraulic oil
Choice of other autoparts from the Steering category for AUDI A2
A4
A3
A6
A5
TT
Q5
A1
Q7
A8
Q3
A7
Most wanted products in Steering rack LAUBER for your AUDI A2
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Manufacturer Restriction: TRW
- Axle Joint Thread Size: M14x1,5
- Overall Length [mm]: 1210
- Input shaft height [mm]: 60
- Number of Teeth on input shaft: 22
- Connector type: sciety
- Condition: Remanufactured
LAUBER | 66.9389
£ 209,41
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Supplementary Article / Supplementary Info Info 2: without coupling rod
- Internal Thread [mm]: M14 x 1.5mm MALE
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Steering Gear Type: Rack and Pinion Steering Gear
- Overall Length [mm]: 1260
- Input shaft height [mm]: 48
- Manufacturer Restriction: ZF
- Axle Joint Thread Size: M14x1,5
- Number of Teeth on input shaft: 22
- Connector type: sciety
- Condition: Remanufactured
LAUBER | 66.0747
£ 273,71
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Vehicle Equipment: for vehicles without servotronic steering
- Manufacturer Restriction: ZF, KOYO
- Observe service information
- Overall Length [mm]: 1035
- Input shaft height [mm]: 35
- Axle Joint Thread Size: M14x1,5
- Connector type: klin
- Condition: Remanufactured
LAUBER | 66.0748
£ 316,32
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Exchange Part
- Condition: Remanufactured
LAUBER | 66.9189U
£ 158,73
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Vehicle Equipment: for vehicles with power steering, for vehicles with steering angle sensor at steering column
- Length [mm]: 627
- Observe technical data
- Overall Length [mm]: 1208
- Manufacturer Restriction: TRW
- Input shaft height [mm]: 60
- Axle Joint Thread Size: M16x1,5
- Number of Teeth on input shaft: 22
- Connector type: sciety
- Condition: new
LAUBER | 66.9991
£ 257,20
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Exchange Part
- Overall Length [mm]: 1210
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Input shaft height [mm]: 65
- Axle Joint Thread Size: M14x1,5
- Number of Teeth on input shaft: 22
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.9189
£ 242,86
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: TRW
- Steering: with fitting for steering angle sensor
- Supplementary Article / Supplementary Info Info 2: Sensor with one disc, without sensor
- Observe technical data
- Overall Length [mm]: 1180
- Steering Gear Type: Rack and Pinion Steering Gear
- Condition: new
LAUBER | 66.1189
£ 215,39
Condition: new
Steering rack LAUBER
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Operating Mode: Electric
- Additionally required articles (article numbers): see service info
- Vehicle Equipment: for vehicles with electric power steering
- Supplementary Article / Supplementary Info Info 2: without steering bellow, without axle joint
- Condition: Remanufactured
LAUBER | 67.0102
£ 333,01
Condition: Remanufactured
Steering rack LAUBER
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Operating Mode: Hydraulic
- Vehicle Equipment: for vehicles with servotronic steering
- Supplementary Article / Supplementary Info Info 2: without axle joint
- Steering Gear Type: Rack and Pinion Steering Gear
- Condition: Remanufactured
LAUBER | 66.9254
£ 344,66
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Vehicle Equipment: for vehicles without servotronic steering
- Manufacturer Restriction: ZF, KOYO
- Observe service information
- Exchange Part
- Condition: Remanufactured
LAUBER | 66.1748U
£ 158,73
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Internal Thread [mm]: M14 x 1.5mm FEMALE
- Exchange Part
- Condition: Remanufactured
LAUBER | 66.9064U
£ 158,73
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- for steering gear manufacturer: ZF
- Exchange Part
- Input shaft height [mm]: 35
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M20x1,5
- Number of Teeth on input shaft: 44
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.9013
£ 257,15
Condition: Remanufactured
