Starter motor from MAPCO for RENAULT CLIO
Starter motors MAPCO for all RENAULT CLIO car models
Clio II Hatchback (BB, CB)
Clio III Hatchback (BR0/1, CR0/1)
Clio I Hatchback
Clio IV Hatchback (BH)
Clio II Van
Clio III Grandtour
Clio IV Grandtour (KH)
Clio I Van
Clio III Van (SB_, SR_)
Clio IV Van
Clio V Hatchback (BF)
Clio IV Estate Van (KH)
Best producers of high-quality Starter motor for RENAULT CLIO
Other car parts for Electrics
ABS sensor
Rear lights
Brake pad wear sensor
Sensors
Headlights
Side indicator
Choice of other autoparts from the Electrics category for RENAULT CLIO
MEGANE
TRAFIC
MASTER
CAPTUR
SCÉNIC
KANGOO
LAGUNA- KADJAR
GRAND SCÉNIC
TWINGO
ESPACE
KOLEOS
MODUS
Most wanted products in Starter motor MAPCO for your RENAULT CLIO
Starter motor MAPCO
- Rated Power [kW]: 1,1
- Voltage [V]: 12
- Number of Teeth: 10
- Rotation Direction: Clockwise rotation
- Number of mounting bores: 3
- Flange Diameter [mm]: 66
- Number of threaded holes: 4
- Plug Type ID: 30, 50
- Position/Degree: li 38
- Used part return not required
- Thread Size: M10
- Observe mounting information
- Condition: new
MAPCO | 13152
£ 107,64
Condition: new
Starter motor MAPCO
- Rated Power [kW]: 0,9
- Voltage [V]: 12
- Number of Teeth: 9
- Rotation Direction: Clockwise rotation
- Number of mounting bores: 1
- Flange Diameter [mm]: 66
- Number of threaded holes: 3
- Plug Type ID: 30, 50
- Position/Degree: rechts 56
- Used part return not required
- Bore Diameter [mm]: 15,5
- Thread Size: M10
- Condition: new
MAPCO | 13852
£ 142,92
Condition: new
Starter motor MAPCO
- Rated Power [kW]: 0,9
- Voltage [V]: 12
- Number of Teeth: 9
- Rotation Direction: Clockwise rotation
- Flange Diameter [mm]: 66
- Number of threaded holes: 4
- Plug Type ID: 30, 50
- Position/Degree: rechts 56
- Used part return not required
- Thread Size: M10
- Condition: new
MAPCO | 13161
£ 112,02
Condition: new
Starter motor MAPCO
- Rated Power [kW]: 0,9
- Voltage [V]: 12
- Number of Teeth: 8
- Rotation Direction: Clockwise rotation
- Flange Diameter [mm]: 65
- Number of threaded holes: 3
- Used part return not required
- Condition: new
MAPCO | 13157
£ 149,55
Condition: new
Starter motor MAPCO
- Rated Power [kW]: 1
- Voltage [V]: 12
- Number of Teeth: 8
- Rotation Direction: Clockwise rotation
- Number of mounting bores: 3
- Flange Diameter [mm]: 66
- Number of threaded holes: 3
- Plug Type ID: 30, 50
- Position/Degree: re 50
- Used part return not required
- Thread Size: M10
- Observe mounting information
- Condition: new
MAPCO | 13155
£ 127,59
Condition: new
Starter motor MAPCO
- Rated Power [kW]: 1,4
- Voltage [V]: 12
- Number of Teeth: 12
- Rotation Direction: Clockwise rotation
- Number of mounting bores: 3
- Flange Diameter [mm]: 63
- Number of threaded holes: 3
- Plug Type ID: M5 "50" Plug 273
- Position/Degree: re 45
- Used part return not required
- Thread Size: M8/M10
- Condition: new
MAPCO | 13156
£ 132,00
Condition: new
Starter motor MAPCO
- Rated Power [kW]: 1,4
- Voltage [V]: 12
- Number of Teeth: 12
- Rotation Direction: Clockwise rotation
- Number of mounting bores: 1
- Flange Diameter [mm]: 65
- Number of threaded holes: 2
- Plug Type ID: 30, 50 (M5)
- Position/Degree: rechts 50
- Used part return not required
- Bore Diameter [mm]: 5,5
- Thread Size: M10
- Condition: new
MAPCO | 13159
£ 109,13
Condition: new
Starter motor MAPCO
- Rated Power [kW]: 1
- Voltage [V]: 12
- Number of Teeth: 8
- Rotation Direction: Clockwise rotation
- Flange Diameter [mm]: 66
- Number of threaded holes: 3
- Plug Type ID: 30, 50
- Position/Degree: links 38
- Used part return not required
- Thread Size: M10
- Condition: new
MAPCO | 13158
£ 92,65
Condition: new
Starter motor MAPCO
- Rated Power [kW]: 2,1
- Voltage [V]: 12
- Number of Teeth: 11
- Rotation Direction: Clockwise rotation
- Number of mounting bores: 3
- Flange Diameter [mm]: 76
- Number of threaded holes: 3
- Plug Type ID: 30, 50 (M5)
- Position/Degree: links 37
- Used part return not required
- Thread Size: M8 / M10
- Condition: new
MAPCO | 13853
£ 174,18
Condition: new
Starter motor MAPCO
- Rated Power [kW]: 2,2
- Voltage [V]: 12
- Number of Teeth: 9
- Rotation Direction: Clockwise rotation
- Number of mounting bores: 3
- Flange Diameter [mm]: 110
- Used part return not required
- Pinion Rest Position [mm]: 27
- Condition: new
MAPCO | 13765
£ 140,99
Condition: new
Starter motor MAPCO
- Rated Power [kW]: 1,1
- Voltage [V]: 12
- Number of Teeth: 9
- Rotation Direction: Clockwise rotation
- Number of mounting bores: 3
- Flange Diameter [mm]: 66
- Number of threaded holes: 3
- Plug Type ID: 30, 50
- Position/Degree: re 32
- Used part return not required
- Thread Size: M10
- Observe mounting information
- Condition: new
MAPCO | 13953
£ 72,58
Condition: new
Starter motor MAPCO
- Rated Power [kW]: 1,4
- Voltage [V]: 12
- Number of Teeth: 9
- Rotation Direction: Clockwise rotation
- Number of mounting bores: 3
- Flange Diameter [mm]: 76,2
- Number of threaded holes: 2
- Plug Type ID: 30, 50
- Position/Degree: re 40
- Used part return not required
- Bore Diameter [mm]: 10
- Thread Size: M10
- Condition: new
MAPCO | 13952
£ 113,64
Condition: new
