Radiator cap from METZGER for TOYOTA PRIUS
Radiator cap METZGER for all TOYOTA PRIUS car models
Prius II Liftback (XW20)
Prius III Hatchback (XW30)
Prius Plus (XW40)
Prius I Saloon (XW10)
Prius IV Liftback (XW50)
Prius C Hatchback
Prius PHV Hatchback (_W52_)
Prius Plus (ZVW4)
Prius V (XW60)
Prius I (XW10)
Best producers of high-quality Radiator cap for TOYOTA PRIUS
Other car parts for Heating and ventilation
Thermostat
Water pump
Radiator
Coolant expansion tank
Heater resistor
Expansion tank cap
Choice of other autoparts from the Heating and ventilation category for TOYOTA PRIUS
YARIS
COROLLA
RAV 4
AURIS
AVENSIS
LAND CRUISER
AYGO
HILUX Pick-up
CELICA
ALPHARD
HIACE
MR 2
VERSO
Most wanted products in Radiator cap METZGER for your TOYOTA PRIUS
Radiator cap METZGER
- Pressure [bar]: 0,9
- Material: Metal
- Diameter [mm]: 44
- Condition: new
METZGER | 2141067
£ 4,88
Condition: new
Radiator cap METZGER
- Pressure [bar]: 1,1
- Material: Metal
- Condition: new
METZGER | 2141069
£ 8,46
Condition: new
Radiator cap METZGER
- Pressure [bar]: 0,9
- Material: Metal
- Diameter [mm]: 45
- Condition: new
METZGER | 2141068
£ 4,95
Condition: new
Breather Screw / -valv...
- Thread Size: M14
- Material: Plastic
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Thread Length [mm]: 40
- Seal Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
METZGER | 4010236
£ 6,85
Condition: new
Breather Screw / -valv...
- Thread Size: M10x1
- Material: Plastic
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Thread Length [mm]: 12,4
- Total Length [mm]: 17,4
- Bolt Head-/Nut Design: Slot
- Seal Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
METZGER | 4010189
£ 3,12
Condition: new
Breather Screw / -valv...
- Thread Size: 99
- Material: Plastic
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Thread Length [mm]: 99
- Seal Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
METZGER | 4010561
£ 8,20
Condition: new
Breather Screw / -valv...
- Fitting Position: Radiator, Lower
- Thread Size: M10
- Material: Plastic
- Total Length [mm]: 13,6
- Bolt Head-/Nut Design: Slot
- Supplementary Article / Supplementary Info: with gasket/seal
- Seal Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
METZGER | 4010235
£ 14,85
Condition: new
Bolt, radiator cap MET...
- Fitting Position: Radiator
- for OE number: A0005000185
- Condition: new
METZGER | 4010160
£ 4,56
Condition: new
