Radiator cap from METZGER for KIA RIO
Radiator cap METZGER for all KIA RIO car models
Rio III Hatchback (UB)
Rio II Hatchback (JB)
Rio I Estate (DC)
Rio I Saloon (DC)
Rio II Saloon (JB)
Rio IV Hatchback (YB, SC, FB)
Rio III Saloon (UB)
Rio IV Saloon (SC, FB)
Rio III Box Body / Hatchback (UB)
Rio IV Box Body / Hatchback (YB, SC, FB)
Best producers of high-quality Radiator cap for KIA RIO
Other car parts for Heating and ventilation
Thermostat
Water pump
Radiator
Coolant expansion tank
Heater resistor
Expansion tank cap
Choice of other autoparts from the Heating and ventilation category for KIA RIO
SPORTAGE
CEE'D
PICANTO
SORENTO
OPTIMA
CARENS
VENGA
SOUL
PROCEED- NIRO
SEDONA
Most wanted products in Radiator cap METZGER for your KIA RIO
Radiator cap METZGER
- Pressure [bar]: 0,9
- Material: Metal
- Diameter [mm]: 45
- Condition: new
METZGER | 2141068
£ 4,95
Condition: new
Radiator cap METZGER
- Pressure [bar]: 1,1
- Material: Metal
- Condition: new
METZGER | 2141069
£ 8,45
Condition: new
Breather Screw / -valv...
- Thread Size: M10x1
- Material: Plastic
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Thread Length [mm]: 12,4
- Total Length [mm]: 17,4
- Bolt Head-/Nut Design: Slot
- Seal Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
METZGER | 4010189
£ 3,12
Condition: new
Bolt, radiator cap MET...
- Fitting Position: Radiator
- for OE number: A0005000185
- Condition: new
METZGER | 4010160
£ 4,56
Condition: new
Breather Screw / -valv...
- Thread Size: M14
- Material: Plastic
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Thread Length [mm]: 40
- Seal Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
METZGER | 4010236
£ 6,85
Condition: new
Radiator cap METZGER
- Pressure [bar]: 0,9
- Material: Metal
- Diameter [mm]: 44
- Condition: new
METZGER | 2141067
£ 4,87
Condition: new
Breather Screw / -valv...
- Fitting Position: Radiator, Lower
- Thread Size: M10
- Material: Plastic
- Total Length [mm]: 13,6
- Bolt Head-/Nut Design: Slot
- Supplementary Article / Supplementary Info: with gasket/seal
- Seal Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
METZGER | 4010235
£ 14,84
Condition: new
Breather Screw / -valv...
- Thread Size: 99
- Material: Plastic
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Thread Length [mm]: 99
- Seal Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
METZGER | 4010561
£ 8,20
Condition: new
