Hoses from METZGER for FERRARI 458
Hoses METZGER for all FERRARI 458 car models
458 Coupe
458 Spider
Best producers of high-quality Hoses for FERRARI 458
Other car parts for Pipes / hoses
Radiator hose
Vacuum hose
Choice of other autoparts from the Pipes / hoses category for FERRARI 458
F430
360 MODENA
CALIFORNIA
348
F355- MONDIAL
- 488
599 GTB FIORANO
550 / 575M Maranello
328- 208/308
456 GT- 296
612 SCAGLIETTI- TESTAROSSA
FF
F12 BERLINETTA- PORTOFINO
- SF90
- 400
- 365
- 812
- F8 Tributo
- DINO
- ROMA
- GTC4Lusso
512- F40
Most wanted products in Hoses METZGER for your FERRARI 458
Radiator hose METZGER
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: from thermostat to expansion tank
- Condition: new
METZGER | 2420135
£ 12,20
Condition: new
Coolant Tube METZGER
- Cooling Hose: from expansion tank to engine cooler
- Supplementary Article / Supplementary Info Info 2: with connector parts
- Condition: new
METZGER | 4010349
£ 11,34
Condition: new
Radiator hose METZGER
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: from distributor to heat exchanger
- Condition: new
METZGER | 2420785
£ 14,75
Condition: new
Seal Ring, coolant tub...
- Inner Diameter [mm]: 36,3
- Thickness [mm]: 3,53
- Material: NBR (nitrile butadiene rubber)
- Condition: new
METZGER | 4010499
£ 3,01
Condition: new
Radiator hose METZGER
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Cylinder Head, transmission side
- Cooling Hose: Coolant Ventilation, from engine to water pipe
- for OE number: 038121473
- Number of inlets/outlets: 2
- Condition: new
METZGER | 2420994
£ 10,78
Condition: new
Radiator hose METZGER
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: from coupling piece to heat exchanger
- Forward- /Backflow: for foreflow
- Heating/Cooling: with vent hole
- Check OE number
- Condition: new
METZGER | 2421198
£ 16,28
Condition: new
Radiator hose METZGER
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: Piping to oil cooler, from oil cooler to water pipe
- Condition: new
METZGER | 2420793
£ 12,44
Condition: new
Radiator hose METZGER
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: from coolant regulator housing to oil cooler, from water pipe to oil cooler
- Condition: new
METZGER | 2420849
£ 19,63
Condition: new
Coolant Tube METZGER
- Heating/Cooling: with vent hole
- Supplementary Article / Supplementary Info Info 2: with screw
- Cooling Hose: from engine to engine cooler
- Angle [°]: 90
- Condition: new
METZGER | 4010416
£ 8,83
Condition: new
Radiator hose METZGER
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: from EGR cooler to heat exchanger
- Forward- /Backflow: for foreflow
- Condition: new
METZGER | 2420060
£ 12,35
Condition: new
Radiator hose METZGER
- Fitting Position: Upper Right
- Cooling Hose: Input, radiator
- Condition: new
METZGER | 2421166
£ 69,66
Condition: new
Radiator hose METZGER
- Cooling Hose: from expansion tank to engine cooler
- Supplementary Article / Supplementary Info: with quick coupling
- Condition: new
METZGER | 2421542
£ 11,44
Condition: new
