Heater matrix from THERMOTEC for HYUNDAI i30
Heat exchanger THERMOTEC for all HYUNDAI i30 car models
i30 I Hatchback (FD)
i30 I Estate (FD)
i30 II Hatchback (GD)
i30 II Estate (GD)
i30 II Coupe (GD)
i30 III Hatchback (PDE, PD, PDEN)
i30 III Estate (PDE)
i30 III Fastback (PDE, PDEN)
Best producers of high-quality Heater matrix for HYUNDAI i30
Other car parts for Heating and ventilation
Thermostat
Water pump
Radiator
Coolant expansion tank
Heater resistor
Expansion tank cap
Choice of other autoparts from the Heating and ventilation category for HYUNDAI i30
i10
i20
TUCSON
SANTA FE
ix35
i40
GETZ
COUPE
IONIQ
H-1 Box
Most wanted products in Heater matrix THERMOTEC for your HYUNDAI i30
Heater hose THERMOTEC
- Fitting Position: Inlet
- Quantity Unit: Piece
- Weight [g]: 160
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
THERMOTEC | DN0518TT
£ 5,10
Condition: new
Heater matrix THERMOTEC
- Vehicle Equipment: for vehicles with/without air conditioning
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Core Length [mm]: 211
- Core Width [mm]: 149
- Core Depth [mm]: 27
- Condition: new
THERMOTEC | D60508TT
£ 37,97
Condition: new
Heater matrix THERMOTEC
- Core Depth [mm]: 26
- Core Length [mm]: 158
- Core Width [mm]: 206
- Cooling fins material: Aluminium
- Condition: new
THERMOTEC | D60521TT
£ 62,57
Condition: new
Heater hose THERMOTEC
- Fitting Position: Outlet
- Quantity Unit: Piece
- Weight [g]: 125
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
THERMOTEC | DN0544TT
£ 8,19
Condition: new
Heater hose THERMOTEC
- Fitting Position: Outlet
- Quantity Unit: Piece
- Weight [g]: 155
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
THERMOTEC | DN0534TT
£ 5,44
Condition: new
Heater matrix THERMOTEC
- Core Length [mm]: 210
- Core Width [mm]: 155
- Core Depth [mm]: 22
- Cooling fins material: Aluminium
- Condition: new
THERMOTEC | D60515TT
£ 38,35
Condition: new
Heater matrix THERMOTEC
- Core Length [mm]: 145
- Core Width [mm]: 214
- Core Depth [mm]: 26
- Cooling fins material: Aluminium
- Condition: new
THERMOTEC | D60511TT
£ 30,38
Condition: new
Heater hose THERMOTEC
- Fitting Position: Outlet
- Quantity Unit: Piece
- Weight [g]: 150
- Material, 1st layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Material, 2nd layer: Polyester
- Material, 3rd layer: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Condition: new
THERMOTEC | DN0543TT
£ 5,36
Condition: new
Heater matrix THERMOTEC
- Core Length [mm]: 148
- Core Width [mm]: 226
- Core Depth [mm]: 26
- Cooling fins material: Aluminium
- Condition: new
THERMOTEC | D60513TT
£ 50,22
Condition: new
Heater matrix THERMOTEC
- Core Length [mm]: 148
- Core Width [mm]: 236
- Core Depth [mm]: 26
- Cooling fins material: Aluminium
- Condition: new
THERMOTEC | D60516TT
£ 80,55
Condition: new
Heater matrix THERMOTEC
- Core Length [mm]: 235
- Core Depth [mm]: 20
- Core Width [mm]: 145
- Cooling fins material: Aluminium
- Condition: new
THERMOTEC | D60518TT
£ 49,52
Condition: new
Heater matrix THERMOTEC
- Core Depth [mm]: 26
- Core Length [mm]: 154
- Core Width [mm]: 265
- Cooling fins material: Aluminium
- Condition: new
THERMOTEC | D60519TT
£ 63,48
Condition: new
