Cv joint from LÖBRO for VOLKSWAGEN CRAFTER
Joint drive shaft LÖBRO for all VOLKSWAGEN CRAFTER car models
Crafter 30-50 Van (2E)
Crafter 30-35 Minibus (2E)
Crafter 30-50 Platform/Chassis (2F)
Crafter Van (SY, SX)
Crafter Minibus (SY)
Crafter Platform / Chassis (SZ)
Best producers of high-quality Cv joint for VOLKSWAGEN CRAFTER
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Choice of other autoparts from the Suspension category for VOLKSWAGEN CRAFTER
GOLF
POLO
TRANSPORTER
PASSAT
TIGUAN
CADDY
TOUAREG
TOURAN
SCIROCCO
UP
SHARAN
AMAROK
JETTA
Most wanted products in Cv joint LÖBRO for your VOLKSWAGEN CRAFTER
Joint kit, drive shaft...
- Length [mm]: 173
- External Toothing wheel side: 44
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 72
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 103
- Thread Size: M20x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
LÖBRO | 306709
£ 133,92
Condition: new
Joint kit, drive shaft...
- Length [mm]: 175
- External Toothing wheel side: 44
- Internal Toothing wheel side: 31
- Sealing Ring Diameter [mm]: 72
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 107
- Thread Size: M20x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
LÖBRO | 306710
£ 173,33
Condition: new
Joint kit, drive shaft...
- Length [mm]: 32
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 108
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 28
- Bolt Hole Circle Ø [mm]: 94
- Bore Diameter [mm]: 10,2
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
LÖBRO | 306653
£ 105,27
Condition: new
Joint kit, drive shaft...
- Length [mm]: 100
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 98
- Thread Size: M16x1.5x77
- Supplementary Article / Supplementary Info Info 2: with screw
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
LÖBRO | 304329
£ 99,56
Condition: new
Joint kit, drive shaft...
- Length [mm]: 130
- External Toothing wheel side: 22
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 81
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of the recommended special tool: 190135
- Article number of recommended accessories: 190250
- Condition: new
LÖBRO | 302118
£ 53,36
Condition: new
Joint kit, drive shaft...
- Length [mm]: 139
- External Toothing wheel side: 22
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of recommended accessories: 190250
- Condition: new
LÖBRO | 302175
£ 62,28
Condition: new
Joint kit, drive shaft...
- Length [mm]: 172
- External Toothing wheel side: 38
- Internal Toothing wheel side: 31
- Sealing Ring Diameter [mm]: 63
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 107
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
LÖBRO | 306285
£ 174,60
Condition: new
Joint kit, drive shaft...
- Length [mm]: 32
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 108
- Thread Size: M10x1.5x48
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Internal Toothing differential side, conn. to conn. shaft: 28
- Bolt Hole Circle Ø [mm]: 94
- Bore Diameter [mm]: 10,20
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Condition: new
LÖBRO | 302287
£ 77,15
Condition: new
Joint kit, drive shaft...
- Length [mm]: 97
- External Toothing wheel side: 38
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 100
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
LÖBRO | 305969
£ 81,36
Condition: new
Joint kit, drive shaft...
- Length [mm]: 97
- External Toothing wheel side: 38
- Internal Toothing wheel side: 27
- Number of Teeth, ABS ring: 45
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 98
- Thread Size: M16x1.5x77
- Supplementary Article / Supplementary Info Info 2: with screw
- ABS-Ring Diameter [mm]: 81
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of the recommended special tool: 190135
- Article number of recommended accessories: 190130
- Condition: new
LÖBRO | 301961
£ 62,92
Condition: new
Joint kit, drive shaft...
- Length [mm]: 95
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M16x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
LÖBRO | 306689
£ 82,03
Condition: new
Joint kit, drive shaft...
- Length [mm]: 34
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 100
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 33
- Bolt Hole Circle Ø [mm]: 86
- Bore Diameter [mm]: 8
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Condition: new
LÖBRO | 302261
£ 72,72
Condition: new
