Cv joint from SPIDAN for SUBARU LEVORG
Joint drive shaft SPIDAN for all SUBARU LEVORG car models
Levorg I (VM)
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Choice of other autoparts from the Suspension category for SUBARU LEVORG
IMPREZA
FORESTER
LEGACY
OUTBACK
XV
JUSTY
Most wanted products in Cv joint SPIDAN for your SUBARU LEVORG
Joint kit, drive shaft...
- Length [mm]: 139
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of recommended accessories: 190250
- Condition: new
SPIDAN | 20340
£ 92,90
Condition: new
Joint kit, drive shaft...
- Length [mm]: 129
- External Toothing wheel side: 25
- Internal Toothing wheel side: 25
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 89
- Thread Size: M20x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190250
- Condition: new
SPIDAN | 24558
£ 95,10
Condition: new
Joint kit, drive shaft...
- Length [mm]: 81
- External Toothing wheel side: 42
- Internal Toothing wheel side: 25
- Sealing Ring Diameter [mm]: 77
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 85
- Thread Size: M16x1.5
- Dust Cover: with dust cover
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36097
£ 150,07
Condition: new
Joint kit, drive shaft...
- Length [mm]: 189
- External Toothing wheel side: 31
- Internal Toothing wheel side: 28
- Sealing Ring Diameter [mm]: 57
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 94
- Thread Size: M24x2.0
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36111
£ 223,33
Condition: new
Joint kit, drive shaft...
- Length [mm]: 94
- External Toothing wheel side: 42
- Internal Toothing wheel side: 29
- Sealing Ring Diameter [mm]: 77
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 99
- Thread Size: M16x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36482
£ 209,21
Condition: new
Joint kit, drive shaft...
- Length [mm]: 175
- External Toothing wheel side: 44
- Internal Toothing wheel side: 31
- Sealing Ring Diameter [mm]: 72
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 107
- Thread Size: M20x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36531
£ 199,04
Condition: new
Joint kit, drive shaft...
- Length [mm]: 95
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M16x1.5x77
- Supplementary Article / Supplementary Info Info 2: with screw
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190130
- Condition: new
SPIDAN | 23689
£ 106,12
Condition: new
Joint kit, drive shaft...
- Length [mm]: 139
- External Toothing wheel side: 30
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 100
- Thread Size: M24x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 24593
£ 155,39
Condition: new
Joint kit, drive shaft...
- Length [mm]: 34
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 100
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 33
- Bolt Hole Circle Ø [mm]: 86
- Bore Diameter [mm]: 8
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Condition: new
SPIDAN | 22498
£ 82,00
Condition: new
Joint kit, drive shaft...
- Length [mm]: 130
- External Toothing wheel side: 22
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 81
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of the recommended special tool: 190135
- Article number of recommended accessories: 190250
- Condition: new
SPIDAN | 22461
£ 61,20
Condition: new
Joint kit, drive shaft...
- Length [mm]: 114
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 54
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M16x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190250
- Condition: new
SPIDAN | 36037
£ 100,74
Condition: new
Joint kit, drive shaft...
- Length [mm]: 32
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 108
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 28
- Bolt Hole Circle Ø [mm]: 94
- Bore Diameter [mm]: 10,2
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36474
£ 142,43
Condition: new
