Cv joint from SPIDAN for SKODA KAROQ
Joint drive shaft SPIDAN for all SKODA KAROQ car models
Karoq Off-Road (NU7)
Best producers of high-quality Cv joint for SKODA KAROQ
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Choice of other autoparts from the Suspension category for SKODA KAROQ
OCTAVIA
FABIA
SUPERB
YETI
RAPID
KODIAQ
CITIGO
ROOMSTER
FELICIA- KAMIQ
Most wanted products in Cv joint SPIDAN for your SKODA KAROQ
Joint kit, drive shaft...
- Length [mm]: 32
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 108
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 28
- Bolt Hole Circle Ø [mm]: 94
- Bore Diameter [mm]: 10,2
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36474
£ 118,93
Condition: new
Joint kit, drive shaft...
- Length [mm]: 105
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 98
- Thread Size: M16x1.5
- Dust Cover: without dust cover
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36479
£ 132,98
Condition: new
Joint kit, drive shaft...
- Length [mm]: 105
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 100
- Thread Size: M16X1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190130
- Condition: new
SPIDAN | 25225
£ 108,86
Condition: new
Joint kit, drive shaft...
- Length [mm]: 86
- Joint Type: Tripod Joint
- Machined: without groove in internal component
- Joint Diameter [mm]: 86
- Internal Toothing differential side, conn. to conn. shaft: 34
- Bolt Hole Circle Ø [mm]: 100
- Bore Diameter [mm]: 10,10
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36477
£ 142,24
Condition: new
Joint kit, drive shaft...
- Length [mm]: 91
- External Toothing wheel side: 33
- Internal Toothing wheel side: 30
- Number of Teeth, ABS ring: 45
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 88
- Thread Size: M14x1.5x73
- Supplementary Article / Supplementary Info Info 2: with screw
- ABS-Ring Diameter [mm]: 81
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190130
- Condition: new
SPIDAN | 21812
£ 72,91
Condition: new
Joint kit, drive shaft...
- Length [mm]: 95
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M16x1.5x77
- Supplementary Article / Supplementary Info Info 2: with screw
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190130
- Condition: new
SPIDAN | 23689
£ 106,40
Condition: new
Joint kit, drive shaft...
- Length [mm]: 34
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 100
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 33
- Bolt Hole Circle Ø [mm]: 86
- Bore Diameter [mm]: 8
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Condition: new
SPIDAN | 22497
£ 85,95
Condition: new
Joint kit, drive shaft...
- Length [mm]: 32
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 92
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 33
- Bolt Hole Circle Ø [mm]: 78
- Bore Diameter [mm]: 8,90
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Condition: new
SPIDAN | 22455
£ 81,34
Condition: new
Joint kit, drive shaft...
- Length [mm]: 93
- External Toothing wheel side: 33
- Internal Toothing wheel side: 27
- Number of Teeth, ABS ring: 45
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 98
- Thread Size: M14x1.5x73
- Supplementary Article / Supplementary Info Info 2: with screw
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of recommended accessories: 190130
- Condition: new
SPIDAN | 21091
£ 89,05
Condition: new
Joint kit, drive shaft...
- Length [mm]: 95
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M16x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36510
£ 94,37
Condition: new
Joint kit, drive shaft...
- Length [mm]: 86
- Joint Type: Tripod Joint
- Machined: without groove in internal component
- Joint Diameter [mm]: 86
- Internal Toothing differential side, conn. to conn. shaft: 34
- Bolt Hole Circle Ø [mm]: 100
- Bore Diameter [mm]: 10,10
- Number of bores: 6
- Tripod roller diameter [mm]: 43
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Condition: new
SPIDAN | 25177
£ 157,10
Condition: new
Joint kit, drive shaft...
- Length [mm]: 91
- External Toothing wheel side: 33
- Internal Toothing wheel side: 30
- Number of Teeth, ABS ring: 45
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 88
- Thread Size: M14x1.5x73
- Supplementary Article / Supplementary Info Info 2: with screw
- ABS-Ring Diameter [mm]: 81
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of the recommended special tool: 190135
- Condition: new
SPIDAN | 22681
£ 80,19
Condition: new
