Cv joint from JPN for NISSAN MICRA
Joint drive shaft JPN for all NISSAN MICRA car models
Micra III Hatchback (K12)
Micra II Hatchback (K11)
Micra IV Hatchback (K13)
Micra I Hatchback (K10)
Micra C+C III (K12)
Micra V Hatchback (K14)
Micra IV Hatchback (K13KK)
Best producers of high-quality Cv joint for NISSAN MICRA
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Choice of other autoparts from the Suspension category for NISSAN MICRA
QASHQAI
X-TRAIL
JUKE
NOTE
NAVARA
PULSAR
ALMERA
PATROL
NV200
PATHFINDER
LEAF
PRIMERA
Most wanted products in Cv joint JPN for your NISSAN MICRA
Joint kit, drive shaft...
- External Toothing wheel side: 23
- Internal Toothing wheel side: 30
- Number of Teeth, ABS ring: 44
- Sealing Ring Diameter [mm]: 57,3
- Thread Size: M20 x 1,5
- Diameter [mm]: 85
- Condition: new
JPN | 10P9028-JPN
£ 35,19
Condition: new
Joint kit, drive shaft...
- Fitting Position: Front Axle Left
- Length [mm]: 626
- External Toothing wheel side: 21
- Internal Toothing wheel side: 30
- Number of Teeth, ABS ring: 26
- Sealing Ring Diameter [mm]: 57
- Condition: new
JPN | 10P9087-JPN
£ 36,19
Condition: new
Joint kit, drive shaft...
- Length [mm]: 165
- External Toothing wheel side: 27
- Internal Toothing wheel side: 37
- Sealing Ring Diameter [mm]: 56,5
- Thread Size: M22X1,5
- Condition: new
JPN | 10P9175-JPN
£ 44,15
Condition: new
Joint kit, drive shaft...
- Fitting Position: Wheel Side
- Overall Length [mm]: 161
- External Toothing wheel side: 29
- Internal Toothing wheel side: 35
- Sealing Ring Diameter [mm]: 56
- Condition: new
JPN | 10P1086-JPN
£ 32,26
Condition: new
Joint kit, drive shaft...
- External Toothing wheel side: 28
- Internal Toothing wheel side: 36
- Number of Teeth, ABS ring: 51
- Sealing Ring Diameter [mm]: 64,5
- Thread Size: M24 x 1,5
- Diameter [mm]: 101,4
- Condition: new
JPN | 10P9045-JPN
£ 49,94
Condition: new
Joint kit, drive shaft...
- Length [mm]: 96,5
- External Toothing wheel side: 36
- Diameter [mm]: 90, 59,5
- External Thread [mm]: M16 x 1,5
- Internal Toothing differential side, conn. to transmission: 30
- Condition: new
JPN | 10P9002-JPN
£ 35,63
Condition: new
Joint kit, drive shaft...
- External Toothing wheel side: 25
- Internal Toothing wheel side: 33
- Sealing Ring Diameter [mm]: 52,7
- Thread Size: M20 x 1,5
- Diameter [mm]: 84
- Condition: new
JPN | 10P9036-JPN
£ 30,29
Condition: new
Joint kit, drive shaft...
- Fitting Position: Front Axle Left, transmission sided
- Length [mm]: 156
- Sealing Ring Diameter [mm]: 36
- Joint Diameter [mm]: 75,44
- Diameter 1 [mm]: 21,4
- Internal Toothing differential side, conn. to conn. shaft: 27
- External Toothing differential side: 22
- Condition: new
JPN | 10P9051-JPN
£ 31,09
Condition: new
Joint kit, drive shaft...
- Internal Toothing wheel side: 28
- Diameter [mm]: 108
- Bolt Hole Circle Ø [mm]: 94
- Bore Diameter [mm]: 10,2
- Condition: new
JPN | 10P9048-JPN
£ 35,89
Condition: new
Joint kit, drive shaft...
- Length [mm]: 143,0
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 53
- Joint Diameter [mm]: 98
- Thread Size: M20x1.5
- Condition: new
JPN | 10P9029-JPN
£ 40,46
Condition: new
Joint kit, drive shaft...
- External Toothing wheel side: 22
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Thread Size: M20 x 1,5
- Diameter [mm]: 90
- Condition: new
JPN | 10P9020-JPN
£ 34,71
Condition: new
Joint kit, drive shaft...
- Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
- Length [mm]: 104,5
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 72
- Diameter [mm]: 90
- External Thread [mm]: M16 x 1,5
- Condition: new
JPN | 10P9010-JPN
£ 31,22
Condition: new
