Cv joint from SPIDAN for MG HECTOR
Joint drive shaft SPIDAN for all MG HECTOR car models
Hector / Hector Plus SUV
Best producers of high-quality Cv joint for MG HECTOR
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Choice of other autoparts from the Suspension category for MG HECTOR
MG
MG 6- MG 3
MGB- MG 5
MGF
MIDGET- RX8
METRO
Most wanted products in Cv joint SPIDAN for your MG HECTOR
Joint kit, drive shaft...
- Length [mm]: 34
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 100
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 33
- Bolt Hole Circle Ø [mm]: 86
- Bore Diameter [mm]: 8
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Condition: new
SPIDAN | 22498
£ 82,00
Condition: new
Joint kit, drive shaft...
- Length [mm]: 97
- External Toothing wheel side: 38
- Internal Toothing wheel side: 27
- Number of Teeth, ABS ring: 45
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 98
- Thread Size: M16x1.5x77
- Supplementary Article / Supplementary Info Info 2: with screw
- ABS-Ring Diameter [mm]: 81
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of the recommended special tool: 190135
- Article number of recommended accessories: 190130
- Condition: new
SPIDAN | 22763
£ 77,32
Condition: new
Joint kit, drive shaft...
- Length [mm]: 189
- External Toothing wheel side: 31
- Internal Toothing wheel side: 28
- Sealing Ring Diameter [mm]: 57
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 94
- Thread Size: M24x2.0
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36111
£ 223,33
Condition: new
Joint kit, drive shaft...
- Length [mm]: 94
- External Toothing wheel side: 42
- Internal Toothing wheel side: 29
- Sealing Ring Diameter [mm]: 77
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 99
- Thread Size: M16x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36482
£ 209,21
Condition: new
Joint kit, drive shaft...
- Length [mm]: 89
- External Toothing wheel side: 42
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 77
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 100
- Thread Size: M16x1.5x72
- Supplementary Article / Supplementary Info Info 2: with screw
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 24683
£ 120,45
Condition: new
Joint kit, drive shaft...
- Length [mm]: 86
- Joint Type: Tripod Joint
- Machined: without groove in internal component
- Joint Diameter [mm]: 86
- Internal Toothing differential side, conn. to conn. shaft: 34
- Bolt Hole Circle Ø [mm]: 104
- Bore Diameter [mm]: 10,5
- Number of bores: 6
- Tripod roller diameter [mm]: 43
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36475
£ 154,29
Condition: new
Joint kit, drive shaft...
- Length [mm]: 110
- External Toothing wheel side: 30
- Internal Toothing wheel side: 25
- Sealing Ring Diameter [mm]: 71
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 85
- Thread Size: M16x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36102
£ 164,47
Condition: new
Joint kit, drive shaft...
- Length [mm]: 129
- External Toothing wheel side: 25
- Internal Toothing wheel side: 25
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 89
- Thread Size: M20x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190250
- Condition: new
SPIDAN | 24558
£ 95,10
Condition: new
Joint kit, drive shaft...
- Length [mm]: 95
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M16x1.5x77
- Supplementary Article / Supplementary Info Info 2: with screw
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190130
- Condition: new
SPIDAN | 23689
£ 106,12
Condition: new
Joint kit, drive shaft...
- Length [mm]: 36
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 122
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 30
- Bolt Hole Circle Ø [mm]: 104
- Bore Diameter [mm]: 12,20
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 24464
£ 133,85
Condition: new
Joint kit, drive shaft...
- Length [mm]: 139
- External Toothing wheel side: 22
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of recommended accessories: 190250
- Condition: new
SPIDAN | 22494
£ 71,54
Condition: new
Joint kit, drive shaft...
- Length [mm]: 175
- External Toothing wheel side: 44
- Internal Toothing wheel side: 31
- Sealing Ring Diameter [mm]: 72
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 107
- Thread Size: M20x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36531
£ 199,04
Condition: new
