Cv joint from SPIDAN for LEXUS GS
Joint drive shaft SPIDAN for all LEXUS GS car models
GS III (S19)
GS II (S16)
GS IV (L10)
GS I (JZS147_)
Best producers of high-quality Cv joint for LEXUS GS
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Choice of other autoparts from the Suspension category for LEXUS GS
IS
RX
LS
CT
NX
SC- RC
- UX
ES
Most wanted products in Cv joint SPIDAN for your LEXUS GS
Joint kit, drive shaft...
- Length [mm]: 97
- External Toothing wheel side: 38
- Internal Toothing wheel side: 27
- Number of Teeth, ABS ring: 45
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 98
- Thread Size: M16x1.5x77
- Supplementary Article / Supplementary Info Info 2: with screw
- ABS-Ring Diameter [mm]: 81
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of the recommended special tool: 190135
- Article number of recommended accessories: 190130
- Condition: new
SPIDAN | 22763
£ 77,33
Condition: new
Joint kit, drive shaft...
- Length [mm]: 139
- External Toothing wheel side: 30
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 100
- Thread Size: M24x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 24593
£ 155,41
Condition: new
Joint kit, drive shaft...
- Length [mm]: 94
- External Toothing wheel side: 42
- Internal Toothing wheel side: 29
- Sealing Ring Diameter [mm]: 77
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 98
- Thread Size: M16x1.5
- Dust Cover: with dust cover
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36099
£ 167,37
Condition: new
Joint kit, drive shaft...
- Length [mm]: 199
- External Toothing wheel side: 35
- Internal Toothing wheel side: 29
- Sealing Ring Diameter [mm]: 72
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 106
- Thread Size: M33x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 24284
£ 105,56
Condition: new
Joint kit, drive shaft...
- Length [mm]: 32
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 108
- Thread Size: M10x1.5x48
- Supplementary Article / Supplementary Info Info 2: with bolts/screws
- Internal Toothing differential side, conn. to conn. shaft: 28
- Bolt Hole Circle Ø [mm]: 94
- Bore Diameter [mm]: 10,20
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Condition: new
SPIDAN | 22902
£ 91,07
Condition: new
Joint kit, drive shaft...
- Length [mm]: 81
- External Toothing wheel side: 42
- Internal Toothing wheel side: 25
- Sealing Ring Diameter [mm]: 77
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 85
- Thread Size: M16x1.5
- Dust Cover: with dust cover
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36097
£ 150,08
Condition: new
Joint kit, drive shaft...
- Length [mm]: 114
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 54
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M16x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190250
- Condition: new
SPIDAN | 36037
£ 100,75
Condition: new
Joint kit, drive shaft...
- Length [mm]: 139
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of recommended accessories: 190250
- Condition: new
SPIDAN | 20340
£ 92,91
Condition: new
Joint kit, drive shaft...
- Length [mm]: 97
- External Toothing wheel side: 38
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 100
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 25775
£ 97,91
Condition: new
Joint kit, drive shaft...
- Length [mm]: 95
- External Toothing wheel side: 36
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M16x1.5x77
- Supplementary Article / Supplementary Info Info 2: with screw
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190130
- Condition: new
SPIDAN | 23689
£ 106,13
Condition: new
Joint kit, drive shaft...
- Length [mm]: 36
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 122
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 30
- Bolt Hole Circle Ø [mm]: 104
- Bore Diameter [mm]: 12,20
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 24464
£ 133,87
Condition: new
Joint kit, drive shaft...
- Length [mm]: 130
- External Toothing wheel side: 22
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 81
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of the recommended special tool: 190135
- Article number of recommended accessories: 190250
- Condition: new
SPIDAN | 22461
£ 61,21
Condition: new
