Cv joint from JPN for HONDA PRELUDE
Joint drive shaft JPN for all HONDA PRELUDE car models
Prelude V (BB)
Prelude IV (BB)
Prelude III (BA)
Prelude II (AB)
Prelude I Coupe (SN)
Best producers of high-quality Cv joint for HONDA PRELUDE
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Choice of other autoparts from the Suspension category for HONDA PRELUDE
CIVIC
CR-V
JAZZ
ACCORD
HR-V
FR-V
INSIGHT
STEPWGN
CR-Z
S2000
CITY
INTEGRA
LEGEND
STREAM
Most wanted products in Cv joint JPN for your HONDA PRELUDE
Joint kit, drive shaft...
- Fitting Position: Front Axle, Wheel Side
- Length [mm]: 135
- External Toothing wheel side: 26
- Internal Toothing wheel side: 32
- Number of Teeth, ABS ring: 50
- Sealing Ring Diameter [mm]: 55
- Thread Size: M22x1,5
- Condition: new
JPN | 10P4011-JPN
£ 27,04
Condition: new
CV joint JPN
- Fitting Position: Front Axle
- Length [mm]: 89
- External Toothing wheel side: 30
- Internal Toothing wheel side: 32
- Sealing Ring Diameter [mm]: 69,5
- External Thread [mm]: 26 X 1,5
- Condition: new
JPN | 10P4056-JPN
£ 34,75
Condition: new
Joint kit, drive shaft...
- Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
- Length [mm]: 155
- External Toothing wheel side: 22
- Internal Toothing wheel side: 28
- Number of Teeth, ABS ring: 29
- Sealing Ring Diameter [mm]: 52
- Diameter [mm]: 80
- External Thread [mm]: M20 x 1
- Condition: new
JPN | 10P9012-JPN
£ 29,73
Condition: new
Joint kit, drive shaft...
- External Toothing wheel side: 25
- Internal Toothing wheel side: 34
- Number of Teeth, ABS ring: 48
- Sealing Ring Diameter [mm]: 58,5
- Thread Size: M24 x 1,5
- Diameter [mm]: 86
- Condition: new
JPN | 10P9076-JPN
£ 34,21
Condition: new
Joint kit, drive shaft...
- Length [mm]: 31,5
- Joint Diameter [mm]: 108
- Thread Size: M10x1,5x48
- Internal Toothing differential side, conn. to conn. shaft: 28
- Bolt Hole Circle Ø [mm]: 94
- Bore Diameter [mm]: 10,2
- Number of bores: 6
- Condition: new
JPN | 10P9024-JPN
£ 35,55
Condition: new
Joint kit, drive shaft...
- External Toothing wheel side: 23
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 49
- Thread Size: M20 x 1,5
- Diameter [mm]: 83,6
- Condition: new
JPN | 10P9044-JPN
£ 31,12
Condition: new
Joint kit, drive shaft...
- External Toothing wheel side: 23
- Internal Toothing wheel side: 30
- Number of Teeth, ABS ring: 44
- Sealing Ring Diameter [mm]: 57,3
- Thread Size: M20 x 1,5
- Diameter [mm]: 85
- Condition: new
JPN | 10P9028-JPN
£ 35,19
Condition: new
Joint kit, drive shaft...
- External Toothing wheel side: 25
- Internal Toothing wheel side: 33
- Sealing Ring Diameter [mm]: 52,7
- Thread Size: M20 x 1,5
- Diameter [mm]: 84
- Condition: new
JPN | 10P9036-JPN
£ 30,29
Condition: new
Joint kit, drive shaft...
- Length [mm]: 104,8
- External Toothing wheel side: 36
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 55,2
- Joint Diameter [mm]: 82,2
- Thread Size: M10x1.5F
- Condition: new
JPN | 10P9110-JPN
£ 30,46
Condition: new
Joint kit, drive shaft...
- Internal Toothing wheel side: 28
- Diameter [mm]: 108
- Bolt Hole Circle Ø [mm]: 94
- Bore Diameter [mm]: 10,2
- Condition: new
JPN | 10P9048-JPN
£ 35,89
Condition: new
Joint kit, drive shaft...
- External Toothing wheel side: 35
- Internal Toothing wheel side: 29
- Sealing Ring Diameter [mm]: 71,5
- Thread Size: M33 x 1,5
- Diameter [mm]: 105,9
- Condition: new
JPN | 10P9046-JPN
£ 47,38
Condition: new
Joint kit, drive shaft...
- External Toothing wheel side: 33
- Internal Toothing wheel side: 30
- Number of Teeth, ABS ring: 45
- Sealing Ring Diameter [mm]: 53
- Thread Size: M14 x 1,5
- Diameter [mm]: 87,9
- Condition: new
JPN | 10P9007-JPN
£ 33,82
Condition: new
