Cv joint from SPIDAN for DAIHATSU SIRION
Joint drive shaft SPIDAN for all DAIHATSU SIRION car models
Sirion II (M300)
Sirion I (M100)
Sirion III (M600)
Sirion (M700)
Sirion IV (M800)
Best producers of high-quality Cv joint for DAIHATSU SIRION
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Choice of other autoparts from the Suspension category for DAIHATSU SIRION
TERIOS
CUORE / MIRA
HIJET
CHARADE
MATERIA
FOURTRAK
COPEN
YRV
SPORTRAK
EXTOL
MOVE
Most wanted products in Cv joint SPIDAN for your DAIHATSU SIRION
Joint kit, drive shaft...
- Length [mm]: 34
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 100
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 33
- Bolt Hole Circle Ø [mm]: 86
- Bore Diameter [mm]: 8
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Condition: new
SPIDAN | 22498
£ 81,71
Condition: new
Joint kit, drive shaft...
- Length [mm]: 94
- External Toothing wheel side: 42
- Internal Toothing wheel side: 29
- Sealing Ring Diameter [mm]: 77
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 99
- Thread Size: M16x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36482
£ 208,47
Condition: new
Joint kit, drive shaft...
- Length [mm]: 130
- External Toothing wheel side: 22
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 81
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of the recommended special tool: 190135
- Article number of recommended accessories: 190250
- Condition: new
SPIDAN | 22461
£ 60,98
Condition: new
Joint kit, drive shaft...
- Length [mm]: 189
- External Toothing wheel side: 31
- Internal Toothing wheel side: 28
- Sealing Ring Diameter [mm]: 57
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 94
- Thread Size: M24x2.0
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36111
£ 222,53
Condition: new
Joint kit, drive shaft...
- Length [mm]: 36
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 122
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 30
- Bolt Hole Circle Ø [mm]: 104
- Bore Diameter [mm]: 12,20
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 24464
£ 133,37
Condition: new
Joint kit, drive shaft...
- Length [mm]: 86
- Joint Type: Tripod Joint
- Machined: without groove in internal component
- Joint Diameter [mm]: 86
- Internal Toothing differential side, conn. to conn. shaft: 34
- Bolt Hole Circle Ø [mm]: 104
- Bore Diameter [mm]: 10,5
- Number of bores: 6
- Tripod roller diameter [mm]: 43
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36475
£ 153,73
Condition: new
Joint kit, drive shaft...
- Length [mm]: 139
- External Toothing wheel side: 22
- Internal Toothing wheel side: 30
- Sealing Ring Diameter [mm]: 53
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 90
- Thread Size: M20x1.5
- Supplementary Article / Supplementary Info Info 2: with nut
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of recommended accessories: 190250
- Condition: new
SPIDAN | 22494
£ 71,28
Condition: new
Joint kit, drive shaft...
- Length [mm]: 94
- External Toothing wheel side: 42
- Internal Toothing wheel side: 29
- Sealing Ring Diameter [mm]: 77
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 98
- Thread Size: M16x1.5
- Dust Cover: with dust cover
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36099
£ 166,75
Condition: new
Joint kit, drive shaft...
- Length [mm]: 84
- Joint Type: Tripod Joint
- Machined: without groove in internal component
- Joint Diameter [mm]: 86
- Internal Toothing differential side, conn. to conn. shaft: 34
- Bolt Hole Circle Ø [mm]: 104
- Bore Diameter [mm]: 10,58
- Number of bores: 6
- Tripod roller diameter [mm]: 43
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: NBR (nitrile butadiene rubber)
- Article number of the recommended special tool: 190135
- Condition: new
SPIDAN | 24745
£ 100,44
Condition: new
Joint kit, drive shaft...
- Length [mm]: 175
- External Toothing wheel side: 44
- Internal Toothing wheel side: 31
- Sealing Ring Diameter [mm]: 72
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 107
- Thread Size: M20x1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36531
£ 237,58
Condition: new
Joint kit, drive shaft...
- Length [mm]: 105
- External Toothing wheel side: 36
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 60
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 100
- Thread Size: M16X1.5
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190130
- Condition: new
SPIDAN | 25225
£ 108,18
Condition: new
Joint kit, drive shaft...
- Length [mm]: 32
- Joint Type: Flexible Joint Disc
- Machined: without groove in internal component
- Joint Diameter [mm]: 108
- Supplementary Article / Supplementary Info Info 2: with cap
- Internal Toothing differential side, conn. to conn. shaft: 28
- Bolt Hole Circle Ø [mm]: 94
- Bore Diameter [mm]: 10,2
- Number of bores: 6
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Condition: new
SPIDAN | 36474
£ 118,19
Condition: new
