Select your engine (type)
Cv joint for CADILLAC XT4 Off-Road 2018 - 2022
Select by fuel type
Other Suspension spares for XT4 Off-Road
- CADILLAC XT4 Off-Road Control arm
- CADILLAC XT4 Off-Road Anti-roll bar link
- CADILLAC XT4 Off-Road Wheel hub
- CADILLAC XT4 Off-Road Wheel bearing
- CADILLAC XT4 Off-Road Suspension ball joint
- CADILLAC XT4 Off-Road Anti-roll bar bushes
- CADILLAC XT4 Off-Road Suspension bushes
- CADILLAC XT4 Off-Road Gearbox oil and transmission fluid
- CADILLAC XT4 Off-Road Drive shaft
- CADILLAC XT4 Off-Road Cv boot
- CADILLAC XT4 Off-Road Wheel bolts and wheel nuts
- CADILLAC XT4 Off-Road Axle bushes
- CADILLAC XT4 Off-Road Drive shaft coupling
- CADILLAC XT4 Off-Road Automatic transmission fluid
- CADILLAC XT4 Off-Road Steering knuckle
XT4 Off-Road cv joint : the most popular products
Joint kit, drive shaft
- Fitting Position: Front Axle, Wheel Side
- External Toothing wheel side: 30
- Internal Toothing wheel side: 24
- Sealing Ring Diameter [mm]: 54
- Diameter [mm]: 87
- Fabrication Number: NPZ-CH-020
- Packaging width [cm]: 10,5
- Packaging height [cm]: 10,5
- Condition: new
NTY | NPZ-CH-020
£ 54,91
Condition: new
Joint kit, drive shaft
- for article number: KVW819
- Diameter [mm]: 100
- Internal Toothing differential side, conn. to conn. shaft: 33
- Condition: new
LPR | KVW819
£ 27,35
Condition: new
Joint kit, drive shaft
- Length [mm]: 160
- External Toothing wheel side: 30
- Internal Toothing wheel side: 26
- Sealing Ring Diameter [mm]: 52
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 91
- Thread Size: M24X1.5
- Dust Cover: without dust cover
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190250
- Condition: new
SPIDAN | 23984
£ 110,77
Condition: new
Joint kit, drive shaft
- Fitting Position: A1
- Length [mm]: 161
- Sealing Ring Diameter [mm]: 35
- Internal Toothing differential side, conn. to transmission: 28
- External Toothing differential side: 27
- Condition: new
GSP | 699138
£ 74,36
Condition: new
Joint kit, drive shaft
- Fitting Position: Front Axle, Front Axle Left, Front Axle Right
- Internal Toothing wheel side: 35
- Height [mm]: 81
- Fabrication Number: NPW-CH-073
- Condition: new
NTY | NPW-CH-073
£ 91,73
Condition: new
Joint kit, drive shaft
- for article number: 36K819
- Diameter [mm]: 100
- Internal Toothing differential side, conn. to conn. shaft: 33
- Condition: new
SAMKO | 36K819
£ 37,67
Condition: new
Joint kit, drive shaft
- Fitting Position: Front Axle Right, transmission sided
- Sealing Ring Diameter [mm]: 35
- Joint Type: Tripod Joint
- Diameter [mm]: 76
- Internal Toothing differential side, conn. to transmission: 22
- External Toothing differential side: 34
- Fabrication Number: NPW-CH-033
- Packaging width [cm]: 9,5
- Packaging height [cm]: 9,5
- Condition: new
NTY | NPW-CH-033
£ 83,05
Condition: new
CV joint
- Fitting Position: Front Axle, Wheel Side
- External Toothing wheel side: 33
- Internal Toothing wheel side: 35
- Sealing Ring Diameter [mm]: 72
- Diameter [mm]: 103
- Joint Type: CV Joint
- Quantity: 1
- Packaging length [cm]: 22,0
- Packaging width [cm]: 11,5
- Packaging height [cm]: 11,5
- Condition: new
FEBEST | 3210-ESCIII
£ 66,30
Condition: new
Joint kit, drive shaft
- Fitting Position: Wheel Side, Front Axle
- External Toothing wheel side: 30
- Internal Toothing wheel side: 23
- Sealing Ring Diameter [mm]: 52
- Joint Type: CV Joint
- Diameter [mm]: 82
- Quantity: 1
- Packaging length [cm]: 20,0
- Packaging width [cm]: 10,5
- Packaging height [cm]: 10,5
- Condition: new
FEBEST | 1810-ASJ14AT
£ 72,43
Condition: new
Joint kit, drive shaft
- Length [mm]: 161
- External Toothing wheel side: 30
- Internal Toothing wheel side: 28
- Sealing Ring Diameter [mm]: 55,4
- Thread Size: M24X1,5
- Technical Information Number: Middle groove
- Condition: new
GSP | 821030
£ 49,26
Condition: new
Joint kit, drive shaft
- Length [mm]: 160
- External Toothing wheel side: 30
- Internal Toothing wheel side: 26
- Sealing Ring Diameter [mm]: 52
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 91
- Thread Size: M24X1.5
- Dust Cover: without dust cover
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190250
- Condition: new
LÖBRO | 304383
£ 94,07
Condition: new
Joint kit, drive shaft
- Length [mm]: 160
- External Toothing wheel side: 30
- Internal Toothing wheel side: 26
- Sealing Ring Diameter [mm]: 53,8
- Thread Size: M24X1,5
- Technical Information Number: without Rimprotector
- Condition: new
GSP | 817051
£ 45,78
Condition: new
