Select your engine (type)
Cv joint for CADILLAC STS Saloon 2004 - 2005
Select by fuel type
Other Suspension spares for STS Saloon
- CADILLAC STS Saloon Control arm
- CADILLAC STS Saloon Anti-roll bar link
- CADILLAC STS Saloon Wheel hub
- CADILLAC STS Saloon Wheel bearing
- CADILLAC STS Saloon Suspension ball joint
- CADILLAC STS Saloon Anti-roll bar bushes
- CADILLAC STS Saloon Suspension bushes
- CADILLAC STS Saloon Gearbox oil and transmission fluid
- CADILLAC STS Saloon Drive shaft
- CADILLAC STS Saloon Cv boot
- CADILLAC STS Saloon Wheel bolts and wheel nuts
- CADILLAC STS Saloon Axle bushes
- CADILLAC STS Saloon Drive shaft coupling
- CADILLAC STS Saloon Automatic transmission fluid
- CADILLAC STS Saloon Steering knuckle
STS Saloon cv joint : the most popular products
CV joint
- Fitting Position: Front Axle, Wheel Side
- External Toothing wheel side: 30
- Internal Toothing wheel side: 24
- Sealing Ring Diameter [mm]: 54
- Diameter [mm]: 87
- Quantity: 1
- Packaging width [cm]: 10,5
- Packaging height [cm]: 10,5
- Condition: new
FEBEST | 3210-SRX
£ 75,96
Condition: new
Joint kit, drive shaft
- Fitting Position: Front Axle Right, transmission sided
- Sealing Ring Diameter [mm]: 35
- Joint Type: Tripod Joint
- Diameter [mm]: 76
- Internal Toothing differential side, conn. to transmission: 22
- External Toothing differential side: 34
- Fabrication Number: NPW-CH-033
- Packaging width [cm]: 9,5
- Packaging height [cm]: 9,5
- Condition: new
NTY | NPW-CH-033
£ 83,18
Condition: new
CV joint
- Fitting Position: Front Axle Left, transmission sided
- External Toothing differential side: 34
- Internal Toothing differential side, conn. to transmission: 22
- Sealing Ring Diameter [mm]: 38
- Diameter [mm]: 76
- Quantity: 1
- Packaging width [cm]: 9,5
- Packaging height [cm]: 9,5
- Condition: new
FEBEST | 3211-STSLH
£ 81,94
Condition: new
Joint kit, drive shaft
- Fitting Position: Front Axle Right, transmission sided
- Sealing Ring Diameter [mm]: 35
- Joint Type: Tripod Joint
- Diameter [mm]: 76
- Internal Toothing differential side, conn. to transmission: 22
- External Toothing differential side: 34
- Quantity: 1
- Packaging length [cm]: 21,5
- Packaging width [cm]: 9,5
- Packaging height [cm]: 9,5
- Condition: new
FEBEST | 3211-STSRH
£ 83,46
Condition: new
Joint kit, drive shaft
- Fitting Position: Front Axle, Wheel Side
- External Toothing wheel side: 30
- Internal Toothing wheel side: 24
- Sealing Ring Diameter [mm]: 54
- Diameter [mm]: 87
- Fabrication Number: NPZ-CH-020
- Packaging width [cm]: 10,5
- Packaging height [cm]: 10,5
- Condition: new
NTY | NPZ-CH-020
£ 55,01
Condition: new
Joint kit, drive shaft
- Fitting Position: Wheel Side
- External Toothing wheel side: 30
- Internal Toothing wheel side: 26
- Sealing Ring Diameter [mm]: 54, 54,2
- Joint Type: CV Joint
- Condition: new
KAMOKA | 6039
£ 43,87
Condition: new
Joint kit, drive shaft
- Length [mm]: 160
- External Toothing wheel side: 30
- Internal Toothing wheel side: 26
- Sealing Ring Diameter [mm]: 52
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 91
- Thread Size: M24X1.5
- Dust Cover: without dust cover
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190250
- Condition: new
LÖBRO | 304383
£ 94,45
Condition: new
CV joint
- Fitting Position: Front Axle, Wheel Side
- External Toothing wheel side: 33
- Internal Toothing wheel side: 41
- Sealing Ring Diameter [mm]: 80
- Diameter [mm]: 112
- Quantity: 1
- Packaging width [cm]: 11,0
- Packaging height [cm]: 11,0
- Condition: new
FEBEST | 3210-ESCII
£ 80,50
Condition: new
Joint kit, drive shaft
- Fitting Position: Wheel Side
- Length [mm]: 160
- External Toothing wheel side: 30
- Internal Toothing wheel side: 26
- Sealing Ring Diameter [mm]: 54,4
- Machined: with groove in internal component
- Thread Size: M24x1,5
- Diameter [mm]: 91
- Material: Rubber
- Condition: new
STARK | SKJK-0200065
£ 18,21
(Price per item)
Condition: new
Joint kit, drive shaft
- Length [mm]: 160
- External Toothing wheel side: 30
- Internal Toothing wheel side: 26
- Sealing Ring Diameter [mm]: 52
- Joint Type: CV Joint
- Machined: with groove in internal component
- Joint Diameter [mm]: 91
- Thread Size: M24X1.5
- Dust Cover: without dust cover
- New Part
- Supplementary Article / Supplementary Info: with grease
- Bellows Material: TPE (thermoplastic elastomer)
- Article number of recommended accessories: 190250
- Condition: new
SPIDAN | 23984
£ 110,19
Condition: new
Joint kit, drive shaft
- for article number: KVW819
- Diameter [mm]: 100
- Internal Toothing differential side, conn. to conn. shaft: 33
- Condition: new
LPR | KVW819
£ 27,13
Condition: new
Joint kit, drive shaft
- Length [mm]: 159
- External Toothing wheel side: 30
- Internal Toothing wheel side: 27
- Sealing Ring Diameter [mm]: 59,1
- Thread Size: M24X1,5
- Technical Information Number: Middle groove
- Condition: new
GSP | 821057
£ 46,20
Condition: new
