Suspension ball joint from OPTIMAL for TALBOT EXPRESS
Suspension ball joint OPTIMAL for all TALBOT EXPRESS car models
Express 1000-1800 Van
Express 1000-1500 Platform / Chassis
Express 1000-1500 Minibus
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for TALBOT EXPRESS
SIMCA- SAMBA
- MURENA
- MATRA BAGHEERA
- HORIZON
- AVENGER
- SOLARA
- 1307-1510
- RANCHO
- 180
Most wanted products in Suspension ball joint OPTIMAL for your TALBOT EXPRESS
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 15,8
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M14 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 4
- Mounting points diameter [mm]: 10,5
- Fastening Type: Suspended
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-009
£ 80,34
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 15,5
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M14 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 3
- Mounting points diameter [mm]: 10,4
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-967
£ 19,25
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 17,8
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M14 x 1,50 RHT M
- Number of mounting bores: 2
- Mounting points diameter [mm]: 11
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-939
£ 67,38
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info: with accessories
- Length [mm]: 100
- External Thread [mm]: M14 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Thickness [mm]: 8
- Mounting Type: Bolted
- Number of mounting bores: 3
- Mounting points diameter [mm]: 11
- Cone Size 1 [mm]: 15
- Cone Size 2 [mm]: 18,3
- Condition: new
OPTIMAL | G3-2037S
£ 60,54
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Rear Axle Left, Rear Axle Right, Lower
- Cone Size [mm]: 15,8
- Cone Pitch: 1/8
- Diameter 1 [mm]: 16
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-110
£ 77,27
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 17,8
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M16 x 1,50 RHT M
- Number of mounting bores: 3
- Mounting points diameter [mm]: 12,8
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-1003
£ 73,55
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 20,3
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M16 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 2
- Mounting points diameter [mm]: 13
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-835
£ 71,69
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Upper
- Cone Pitch: 1/8
- Outer Diameter 2 [mm]: 43,5
- Diameter [mm]: 35,2
- Required quantity: 2
- External Thread [mm]: M10 x 1,25 RHT M
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Cone Size 1 [mm]: 12,8
- Cone Size 2 [mm]: 14,2
- Notches/Holes Number: 1
- Condition: new
OPTIMAL | G3-1093
£ 26,19
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Required quantity: 2
- External Thread [mm]: M16 x 1,50 RHT M
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Mounting points diameter [mm]: 12,5
- Registration Type: TÜV®/GS approved
- Cone Size 1 [mm]: 20,6
- Cone Size 2 [mm]: 24,3
- Condition: new
OPTIMAL | G3-988
£ 73,55
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Pitch: 1/8
- Outer Diameter 2 [mm]: 40,1
- Diameter [mm]: 44
- Required quantity: 2
- External Thread [mm]: M12 x 1,25 RHT M
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Fastening Type: Suspended
- Cone Size 1 [mm]: 16
- Cone Size 2 [mm]: 18,1
- Condition: new
OPTIMAL | G3-1099
£ 58,65
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 17,2
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M16 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 3
- Mounting points diameter [mm]: 12,8
- Alternative Repair Kit: G3-1113
- Condition: new
OPTIMAL | G3-1113S
£ 44,15
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Bolt Head Diameter [mm]: 21
- Number of mounting bores: 3
- for article number: G6-1443, G6-1444
- Condition: new
OPTIMAL | G3-1058
£ 29,98
Condition: new
