Suspension ball joint from OPTIMAL for SAAB 96
Suspension ball joint OPTIMAL for all SAAB 96 car models
96 Saloon
Best producers of high-quality Suspension ball joint for SAAB 96
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for SAAB 96
9-3
9-5
900
9000
99
Most wanted products in Suspension ball joint OPTIMAL for your SAAB 96
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- Bore Diameter [mm]: 8,5
- Control/Trailing Arm Type: for control arm
- Bolt Head Diameter [mm]: 18
- Number of mounting bores: 3
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-169
£ 53,25
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 20
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 3
- Mounting points diameter [mm]: 10,5
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-1022
£ 61,41
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower, Upper
- Cone Size [mm]: 17,2
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 4
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 2
- Mounting points diameter [mm]: 11,5
- Registration Type: TÜV®/GS approved
- External Thread [inch]: 1/2"-20 UNF
- Condition: new
OPTIMAL | G3-104
£ 20,24
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 20
- Diameter 1 [mm]: 20
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-105
£ 35,40
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right
- Outer Diameter 2 [mm]: 38,6
- Diameter [mm]: 41,2
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Bolt Head Diameter [mm]: 17,5
- Condition: new
OPTIMAL | G3-1060
£ 37,33
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 4
- External Thread [mm]: M12 x 1,50 RHT M
- Mounting points diameter [mm]: 10,5
- Fastening Type: Suspended
- Cone Size 1 [mm]: 13
- Cone Size 2 [mm]: 15,2
- Alternative Repair Kit: G3-933, G3-933S4
- Condition: new
OPTIMAL | G3-933S3
£ 71,47
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Outer Diameter 2 [mm]: 34,2
- Diameter [mm]: 36,6
- Required quantity: 2
- External Thread [mm]: M14 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Bolt Head Diameter [mm]: 14
- Condition: new
OPTIMAL | G3-1107
£ 48,69
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M12 x 1,25 RHT M
- Number of mounting bores: 3
- Mounting points diameter [mm]: 12,4
- Cone Size 1 [mm]: 15,8
- Cone Size 2 [mm]: 22,2
- Condition: new
OPTIMAL | G3-2001S
£ 36,66
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Rear Axle Left, Rear Axle Right, Lower
- Cone Size [mm]: 15,8
- Cone Pitch: 1/8
- Diameter 1 [mm]: 16
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-110
£ 77,64
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Outer Diameter 2 [mm]: 38,3
- Diameter [mm]: 46
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Bolt Head Diameter [mm]: 18
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-953
£ 13,82
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Bolt Head Diameter [mm]: 19
- Number of mounting bores: 3
- Mounting points diameter [mm]: 8,5
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-080
£ 70,15
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Bolt Head Diameter [mm]: 21
- Number of mounting bores: 3
- for article number: G6-1443, G6-1444
- Condition: new
OPTIMAL | G3-1058
£ 30,01
Condition: new
