Suspension ball joint from OPTIMAL for PUCH G-MODELL
Suspension ball joint OPTIMAL for all PUCH G-MODELL car models
G-modell (W460)
G-modell (W463)
G-modell (W461)
Best producers of high-quality Suspension ball joint for PUCH G-MODELL
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for PUCH G-MODELL
Most wanted products in Suspension ball joint OPTIMAL for your PUCH G-MODELL
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Diameter [mm]: 42,5
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Mounting Type: Pressed
- Bolt Head Diameter [mm]: 20
- Condition: new
OPTIMAL | G3-2024
£ 41,86
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right
- Outer Diameter 2 [mm]: 38,6
- Diameter [mm]: 41,2
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Bolt Head Diameter [mm]: 17,5
- Condition: new
OPTIMAL | G3-1060
£ 37,33
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Outer Diameter 2 [mm]: 38,3
- Diameter [mm]: 46
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Bolt Head Diameter [mm]: 18
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-953
£ 13,82
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Thread Size: M18 x 1,50 RHT M
- Supplementary Article / Supplementary Info: without accessories
- Diameter [mm]: 47
- Required quantity: 2
- Supplementary Article / Supplementary Info Info 2: without clip
- Registration Type: TÜV®/GS approved
- Alternative Repair Kit: G3-627S
- Condition: new
OPTIMAL | G3-627
£ 23,13
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Rear Axle Left, Rear Axle Right, Lower
- Cone Size [mm]: 15,8
- Cone Pitch: 1/8
- Diameter 1 [mm]: 16
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-110
£ 77,64
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 17,8
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M14 x 1,50 RHT M
- Number of mounting bores: 2
- Mounting points diameter [mm]: 11
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-939
£ 67,71
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Outer Diameter 2 [mm]: 41,3
- Diameter [mm]: 48,7
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Bolt Head Diameter [mm]: 20
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-1034
£ 34,80
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 17,2
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M16 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 3
- Mounting points diameter [mm]: 12,8
- Alternative Repair Kit: G3-1113
- Condition: new
OPTIMAL | G3-1113S
£ 44,36
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Bolt Head Diameter [mm]: 19
- Number of mounting bores: 3
- Mounting points diameter [mm]: 8,5
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-080
£ 70,15
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info: with accessories
- Length [mm]: 100
- External Thread [mm]: M14 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Thickness [mm]: 8
- Mounting Type: Bolted
- Number of mounting bores: 3
- Mounting points diameter [mm]: 11
- Cone Size 1 [mm]: 15
- Cone Size 2 [mm]: 18,3
- Condition: new
OPTIMAL | G3-2037S
£ 60,84
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Outer Diameter 2 [mm]: 34,2
- Diameter [mm]: 36,6
- Required quantity: 2
- External Thread [mm]: M14 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Bolt Head Diameter [mm]: 14
- Condition: new
OPTIMAL | G3-1107
£ 48,69
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Upper
- Cone Pitch: 1/8
- Outer Diameter 2 [mm]: 43,5
- Diameter [mm]: 35,2
- Required quantity: 2
- External Thread [mm]: M10 x 1,25 RHT M
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Cone Size 1 [mm]: 12,8
- Cone Size 2 [mm]: 14,2
- Notches/Holes Number: 1
- Condition: new
OPTIMAL | G3-1093
£ 26,31
Condition: new
