Suspension ball joint from OPTIMAL for ISUZU ELF
Suspension ball joint OPTIMAL for all ISUZU ELF car models
Elf Platform / Chassis (NKR8_, NKQ8_)
Elf Van (NKR8_)
Elf Platform / Chassis (NKR7_, NKS7_, NHR6_, NKR6_, NPR_6)
Best producers of high-quality Suspension ball joint for ISUZU ELF
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for ISUZU ELF
D-MAX
TROOPER
KB- MU-X
- PICKUP
- TFR
- CAMPO
GEMINI
Most wanted products in Suspension ball joint OPTIMAL for your ISUZU ELF
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 20,6
- Cone Pitch: 1/8
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-222
£ 26,15
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Upper
- Cone Size [mm]: 17,6
- Supplementary Article / Supplementary Info: without accessories
- Required quantity: 2
- External Thread [mm]: M14 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 3
- Mounting points diameter [mm]: 10,5
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-914
£ 79,12
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Upper
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Mounting Type: Bolted
- Check OE number
- Condition: new
OPTIMAL | G3-1096
£ 39,07
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, outer, Upper
- Cone Pitch: 1/8
- for OE number: 8-94459-453-3
- Condition: new
OPTIMAL | G3-777
£ 132,82
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Lower
- Cone Size [mm]: 15,4
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 1
- External Thread 2 [mm]: M10 x 1,50 RHT M
- paired article number: G3-956
- Control/Trailing Arm Type: for control arm
- External Thread 1 [mm]: M12 x 1,50 RHT M
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-955
£ 59,22
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Diameter [mm]: 40
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Mounting Type: Pressed
- Bolt Head Diameter [mm]: 20
- Condition: new
OPTIMAL | G3-2006
£ 30,02
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 20,3
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M16 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 2
- Mounting points diameter [mm]: 13
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-835
£ 71,69
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Rear Axle Left, Rear Axle Right, Lower
- Cone Size [mm]: 15,8
- Cone Pitch: 1/8
- Diameter 1 [mm]: 16
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-110
£ 77,27
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Condition: new
OPTIMAL | G3-1088
£ 72,33
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Outer Diameter 2 [mm]: 41,3
- Diameter [mm]: 48,7
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Bolt Head Diameter [mm]: 20
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-1034
£ 34,63
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Outer Diameter 2 [mm]: 38,3
- Diameter [mm]: 46
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Bolt Head Diameter [mm]: 18
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-953
£ 13,76
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 4
- External Thread [mm]: M12 x 1,50 RHT M
- Mounting points diameter [mm]: 10,5
- Fastening Type: Suspended
- Cone Size 1 [mm]: 13
- Cone Size 2 [mm]: 15,2
- Alternative Repair Kit: G3-933, G3-933S4
- Condition: new
OPTIMAL | G3-933S3
£ 71,12
Condition: new
