Suspension ball joint from MAXGEAR for HONDA PRELUDE
Suspension ball joint MAXGEAR for all HONDA PRELUDE car models
Prelude V (BB)
Prelude IV (BB)
Prelude III (BA)
Prelude II (AB)
Prelude I Coupe (SN)
Best producers of high-quality Suspension ball joint for HONDA PRELUDE
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for HONDA PRELUDE
CIVIC
CR-V
JAZZ
ACCORD
HR-V
FR-V
INSIGHT
STEPWGN
CR-Z
S2000
CITY
INTEGRA
LEGEND
STREAM
Most wanted products in Suspension ball joint MAXGEAR for your HONDA PRELUDE
Ball Joint MAXGEAR
- Fitting Position: Front Axle, Lower
- Thread Size: 14 x 1,5
- Fitted Diameter [mm]: 18
- Diameter [mm]: 43
- External Thread 1 [mm]: 14 x 1,5
- Condition: new
MAXGEAR | 72-2702
£ 18,14
Condition: new
Ball Joint MAXGEAR
- Fitting Position: Front Axle, Front Axle Right, Lower, Front Axle Left
- Packaging width [cm]: 5,3
- Packaging height [cm]: 5,3
- Condition: new
MAXGEAR | 72-4800
£ 17,26
Condition: new
Ball Joint MAXGEAR
- Fitting Position: Lower, Front Axle Right, Front Axle Left
- External Thread [mm]: 14X1,5
- Condition: new
MAXGEAR | 72-2044
£ 10,77
Condition: new
Ball Joint MAXGEAR
- Fitting Position: Front Axle, Lower, Front Axle Right, Front Axle Left
- Condition: new
MAXGEAR | 72-2821
£ 10,80
Condition: new
Ball Joint MAXGEAR
- Fitting Position: Rear Axle
- Cone Size [mm]: 12,6
- Diameter [mm]: 33,3
- Control/Trailing Arm Type: for trailing arm
- Mounting Type: Pressed
- Condition: new
MAXGEAR | 72-3620
£ 10,98
Condition: new
Ball Joint MAXGEAR
- Fitting Position: Front Axle, Lower, Front Axle Right, Front Axle Left
- Condition: new
MAXGEAR | 72-1584
£ 15,37
Condition: new
Ball Joint MAXGEAR
- Fitting Position: Lower, Front Axle Right, Front Axle Left
- Thread Size 1: M12x1,25
- Condition: new
MAXGEAR | 72-1583
£ 13,68
Condition: new
Ball Joint MAXGEAR
- Fitting Position: Front Axle, Front Axle Left
- Cone Size [mm]: 18
- Thread Size: M12x1,25
- Weight [kg]: 0,25
- Condition: new
MAXGEAR | 72-2799
£ 16,90
Condition: new
Ball Joint MAXGEAR
- Fitting Position: Front Axle, Lower, Front Axle Right, Front Axle Left
- Thread Size: M10x1,25
- Diameter [mm]: 35,1
- Control/Trailing Arm Type: Control Arm
- Condition: new
MAXGEAR | 72-3155
£ 17,50
Condition: new
Ball Joint MAXGEAR
- paired article number: 72-2811, 5042610
- Condition: new
MAXGEAR | 72-2812
£ 21,47
Condition: new
Ball Joint MAXGEAR
- Fitting Position: Upper Front Axle
- Condition: new
MAXGEAR | 72-4842
£ 18,41
Condition: new
Ball Joint MAXGEAR
- Fitting Position: Front Axle, Front Axle Right, Upper, Front Axle Left
- Cone Size [mm]: 13,50
- Diameter [mm]: 35,50
- Required quantity: 2
- Weight [kg]: 0,190
- Control/Trailing Arm Type: for control arm
- Mounting Type: Pressed
- Condition: new
MAXGEAR | 72-2965
£ 10,85
Condition: new
