Suspension ball joint from OPTIMAL for DAEWOO MAGNUS
Suspension ball joint OPTIMAL for all DAEWOO MAGNUS car models
Magnus Saloon
Best producers of high-quality Suspension ball joint for DAEWOO MAGNUS
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for DAEWOO MAGNUS
MATIZ
LANOS
KALOS
NUBIRA
LACETTI
NEXIA- CIELO
TACUMA
LEGANZA
ESPERO
TICO
MUSSO- RACER
- TOSCA
LUBLIN
KORANDO
Most wanted products in Suspension ball joint OPTIMAL for your DAEWOO MAGNUS
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 15
- Supplementary Article / Supplementary Info: with accessories
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-018
£ 74,47
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 15
- Length [mm]: 150
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-801
£ 76,91
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right
- Cone Size [mm]: 14,9
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Length [mm]: 100
- External Thread [mm]: M12 x 1,25 RHT M
- Mounting points diameter [mm]: 12
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-1004
£ 35,36
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-995
£ 43,73
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 13,5
- Supplementary Article / Supplementary Info: with accessories
- External Thread [mm]: M12 x 1,50 RHT M
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-019
£ 13,77
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 17,2
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M16 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 3
- Mounting points diameter [mm]: 12,8
- Alternative Repair Kit: G3-1113
- Condition: new
OPTIMAL | G3-1113S
£ 44,31
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 17,8
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M14 x 1,50 RHT M
- Number of mounting bores: 2
- Mounting points diameter [mm]: 11
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-939
£ 67,63
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Upper
- Cone Pitch: 1/8
- Outer Diameter 2 [mm]: 43,5
- Diameter [mm]: 35,2
- Required quantity: 2
- External Thread [mm]: M10 x 1,25 RHT M
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Cone Size 1 [mm]: 12,8
- Cone Size 2 [mm]: 14,2
- Notches/Holes Number: 1
- Condition: new
OPTIMAL | G3-1093
£ 26,28
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right
- Outer Diameter 2 [mm]: 38,6
- Diameter [mm]: 41,2
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Bolt Head Diameter [mm]: 17,5
- Condition: new
OPTIMAL | G3-1060
£ 37,29
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Diameter [mm]: 40
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Mounting Type: Pressed
- Bolt Head Diameter [mm]: 20
- Condition: new
OPTIMAL | G3-2006
£ 30,13
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 20,3
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M16 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 2
- Mounting points diameter [mm]: 13
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-835
£ 71,95
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Rear Axle Left, Rear Axle Right, Lower
- Cone Size [mm]: 15,8
- Cone Pitch: 1/8
- Diameter 1 [mm]: 16
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-110
£ 77,55
Condition: new
