Suspension ball joint from OPTIMAL for CHEVROLET MATIZ
Suspension ball joint OPTIMAL for all CHEVROLET MATIZ car models
Matiz (M200, M250)
Best producers of high-quality Suspension ball joint for CHEVROLET MATIZ
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Anti-roll bar bushes
Suspension bushes
Choice of other autoparts from the Suspension category for CHEVROLET MATIZ
CAPTIVA
SPARK
AVEO
CRUZE
ORLANDO
LACETTI
CORVETTE
CAMARO
TRAX
SILVERADO
KALOS
EPICA
Most wanted products in Suspension ball joint OPTIMAL for your CHEVROLET MATIZ
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- Bore Diameter [mm]: 8,5
- Control/Trailing Arm Type: for control arm
- Bolt Head Diameter [mm]: 18
- Number of mounting bores: 3
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-169
£ 53,25
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 15,1
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M12 x 1,75 RHT M
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 3
- Mounting points diameter [mm]: 10,5
- Alternative Repair Kit: G3-1077
- Condition: new
OPTIMAL | G3-1077S
£ 41,20
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Bolt Head Diameter [mm]: 18,2
- Number of mounting bores: 3
- Mounting points diameter [mm]: 10,5
- Condition: new
OPTIMAL | G3-1116S
£ 17,26
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-995
£ 43,78
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right
- Cone Size [mm]: 14,9
- Supplementary Article / Supplementary Info: with fastening/mounting material
- Length [mm]: 100
- External Thread [mm]: M12 x 1,25 RHT M
- Mounting points diameter [mm]: 12
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-1004
£ 35,40
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Bolt Head Diameter [mm]: 21
- Number of mounting bores: 3
- for article number: G6-1443, G6-1444
- Condition: new
OPTIMAL | G3-1058
£ 30,01
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 20,3
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M16 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 2
- Mounting points diameter [mm]: 13
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-835
£ 72,03
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 15
- Required quantity: 2
- External Thread 2 [mm]: M12 x 1,25 RHT M
- Control/Trailing Arm Type: for control arm
- External Thread 1 [mm]: M14 x 1,50 RHT M
- Internal Thread [mm]: M12 x 1,25 RHT F
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-927
£ 79,50
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Outer Diameter 2 [mm]: 34,2
- Diameter [mm]: 36,6
- Required quantity: 2
- External Thread [mm]: M14 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Bolt Head Diameter [mm]: 14
- Condition: new
OPTIMAL | G3-1107
£ 48,69
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Required quantity: 2
- External Thread [mm]: M16 x 1,50 RHT M
- Supplementary Article / Supplementary Info Info 2: without bolts/screws
- Mounting points diameter [mm]: 12,5
- Registration Type: TÜV®/GS approved
- Cone Size 1 [mm]: 20,6
- Cone Size 2 [mm]: 24,3
- Condition: new
OPTIMAL | G3-988
£ 73,90
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 15,5
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- External Thread [mm]: M14 x 1,50 RHT M
- Control/Trailing Arm Type: for control arm
- Number of mounting bores: 3
- Mounting points diameter [mm]: 10,4
- Registration Type: TÜV®/GS approved
- Condition: new
OPTIMAL | G3-967
£ 44,36
Condition: new
Ball Joint OPTIMAL
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Diameter [mm]: 40
- Required quantity: 2
- Control/Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Mounting Type: Pressed
- Bolt Head Diameter [mm]: 20
- Condition: new
OPTIMAL | G3-2006
£ 30,16
Condition: new
