Axle bushes from VAICO for LANCIA FULVIA
Mounting axle bracket VAICO for all LANCIA FULVIA car models
Fulvia Coupe (818)
Fulvia II Saloon (818)
Fulvia I Saloon
Best producers of high-quality Axle bushes for LANCIA FULVIA
Other car parts for Suspension
Control arm
Anti-roll bar link
Wheel hub
Wheel bearing
Suspension ball joint
Anti-roll bar bushes
Choice of other autoparts from the Suspension category for LANCIA FULVIA
DELTA
BETA
YPSILON
THEMA
Y
VOYAGER
MUSA
THESIS
KAPPA
LYBRA
DEDRA
PHEDRA- GAMMA
Most wanted products in Axle bushes VAICO for your LANCIA FULVIA
Axle bush VAICO
- Required quantity: 2
- Diameter [mm]: 67,5, 80
- Inner Diameter [mm]: 13
- Axle alignment required after fitting
- Length [mm]: 100
- Material: Elastomer
- Mounting Type: Hydro Mount
- Fitting Position: Rear Axle
- Weight [kg]: 0,744
- Packaging width [cm]: 8,1
- Packaging height [cm]: 10,1
- Supplementary Info: Original VAICO Quality
- Packaging Depth [cm]: 7,9
- Condition: new
VAICO | V24-0670
£ 16,13
Condition: new
Axle bush VAICO
- Mounting Type: Rubber-Metal Mount
- Fitting Position: Rear Axle
- Axle alignment required after fitting
- Weight [kg]: 0,604
- Packaging width [cm]: 8,3
- Packaging height [cm]: 9
- Supplementary Info: Original VAICO Quality
- Packaging Depth [cm]: 14,8
- Condition: new
VAICO | V20-1154
£ 18,77
Condition: new
Axle bush VAICO
- Required quantity: 2
- Control/Trailing Arm Type: for trailing arm
- Fitting Position: Rear Axle
- Axle alignment required after fitting
- Weight [kg]: 1,138
- Packaging width [cm]: 12
- Packaging height [cm]: 9,1
- Packaging Depth [cm]: 22,8
- Condition: new
VAICO | V25-0811
£ 28,95
Condition: new
Axle bush VAICO
- Axle alignment required after fitting
- Fitting Position: Rear Axle
- Mounting Type: Rubber Mount
- for OE number: 33 55 1 131 155
- Weight [kg]: 0,041
- Packaging width [cm]: 4,3
- Packaging height [cm]: 7,3
- Supplementary Info: Original VAICO Quality
- Packaging Depth [cm]: 7,2
- Condition: new
VAICO | V20-0459
£ 4,36
Condition: new
Axle bush VAICO
- Inner Diameter [mm]: 17
- Diameter [mm]: 48,3
- Fitting Position: Rear Axle, Front
- Mounting Type: Rubber-Metal Mount
- Length [mm]: 61
- Axle alignment required after fitting
- Weight [kg]: 0,3647
- Packaging width [cm]: 7,2
- Packaging height [cm]: 8,1
- Supplementary Info: Original VAICO Quality
- Packaging Depth [cm]: 8,8
- Condition: new
VAICO | V42-0393
£ 10,81
Condition: new
Axle bush VAICO
- Fitting Position: Rear Axle
- Axle alignment required after fitting
- Weight [kg]: 0,3746
- Packaging width [cm]: 11,2
- Packaging height [cm]: 12,6
- Supplementary Info: Original VAICO Quality
- Packaging Depth [cm]: 8,1
- Condition: new
VAICO | V30-1226
£ 21,34
Condition: new
Repair Set, axle beam ...
- Mounting Type: Rubber-Metal Mount
- Special Purpose Vehicle: not for taxis
- Fitting Position: Rear Axle, Front
- Weight [kg]: 0,783
- Supplementary Info: EXPERT KITS +
- Packaging width [cm]: 8,3
- Packaging height [cm]: 9
- Packaging Depth [cm]: 14,8
- Condition: new
VAICO | V30-7297
£ 29,96
Condition: new
Tie Bar Bush VAICO
- Fitting Position: Rear Axle
- Supplementary Info: Original VAICO Quality
- for OE number: 1K0 505 203 A
- Axle alignment required after fitting
- Mounting Type: Rubber-Metal Mount
- Inner Diameter [mm]: 14
- Weight [kg]: 0,08
- Packaging width [cm]: 9,3
- Packaging height [cm]: 9
- Packaging Depth [cm]: 5
- Condition: new
VAICO | V10-1452
£ 6,43
Condition: new
Axle bush VAICO
- Height [mm]: 75
- Mounting Type: Rubber-Metal Mount
- Axle alignment required after fitting
- Fitting Position: Rear Axle, inner
- Diameter [mm]: 70
- Packaging width [cm]: 7
- Packaging height [cm]: 7,5
- Supplementary Info: Original VAICO Quality
- Packaging Depth [cm]: 7
- Condition: new
VAICO | V10-6081
£ 12,16
Condition: new
Axle bush VAICO
- Required quantity: 2
- Fitting Position: Rear Axle
- Axle alignment required after fitting
- Weight [kg]: 0,37
- Packaging width [cm]: 6,5
- Packaging height [cm]: 9
- Supplementary Info: Original VAICO Quality
- Packaging Depth [cm]: 6,7
- Condition: new
VAICO | V21-0014
£ 13,83
Condition: new
Mounting, axle bracket...
- Fitting Position: Front Axle, Rear
- Weight [kg]: 0,46
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 8,3
- Packaging height [cm]: 9
- Packaging Depth [cm]: 14,8
- Condition: new
VAICO | V30-1144
£ 21,06
Condition: new
Axle bush VAICO
- for OE number: 124 351 02 42
- Fitting Position: Rear, Rear Axle
- Axle alignment required after fitting
- Weight [kg]: 0,3796
- Packaging width [cm]: 11,2
- Packaging height [cm]: 12,6
- Supplementary Info: Original VAICO Quality
- Packaging Depth [cm]: 8,1
- Condition: new
VAICO | V30-1225
£ 20,65
Condition: new
