ABS sensor from HELLA for ISUZU D-MAX
ABS wheel speed sensor HELLA for all ISUZU D-MAX car models
D-Max I Pickup (TFR, TFS)
D-Max II Pickup (TFR, TFS)
D-Max I Platform / Chassis (TFR, TFS)
D-Max II Platform / Chassis (TFR, TFS)
D-MAX III Pickup (RG01)
D-Max III Platform / Chassis (TFR, TFS)
Best producers of high-quality ABS sensor for ISUZU D-MAX
Other car parts for Electrics
Rear lights
Brake pad wear sensor
Sensors
Headlights
Side indicator
Temperature sensor
Choice of other autoparts from the Electrics category for ISUZU D-MAX
TROOPER
KB- ELF
- MU-X
- PICKUP
- TFR
- CAMPO
GEMINI
Most wanted products in ABS sensor HELLA for your ISUZU D-MAX
ABS sensor HELLA
- Fitting Position: Front Axle Left, Front Axle Right
- Cable Length [mm]: 960
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Wear Warning Contact: prepared for wear warning indicator
- Assy./disassy. by qualified personnel required!
- Condition: new
HELLA | 6PU 012 806-921
£ 21,86
Condition: new
ABS sensor HELLA
- Fitting Position: Front Axle
- Cable Length [mm]: 555
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Resistor [Ohm]: 1120
- Voltage [V]: 12
- Assy./disassy. by qualified personnel required!
- Condition: new
HELLA | 6PU 010 039-361
£ 21,58
Condition: new
ABS sensor HELLA
- Fitting Position: Rear Axle
- Cable Length [mm]: 1020
- Sensor Type: Inductive Sensor
- Vehicle Equipment: for vehicles without headlight levelling (automatic)
- Number of pins: 2
- Assy./disassy. by qualified personnel required!
- Condition: new
HELLA | 6PU 012 806-901
£ 20,76
Condition: new
ABS sensor HELLA
- Cable Length [mm]: 871
- Sensor Type: Hall Sensor
- Number of pins: 2
- Voltage [V]: 12
- Number of mounting bores: 1
- Assy./disassy. by qualified personnel required!
- Condition: new
HELLA | 6PU 012 039-751
£ 34,70
Condition: new
ABS sensor HELLA
- Cable Length [mm]: 1015
- Sensor Type: Hall Sensor
- Number of pins: 2
- Assy./disassy. by qualified personnel required!
- Condition: new
HELLA | 6PU 230 048-201
£ 20,94
Condition: new
ABS sensor HELLA
- Cable Length [mm]: 740
- Sensor Type: Hall Sensor
- Number of pins: 2
- Supplementary Article / Supplementary Info Info 2: with fastening clips on the cable
- Assy./disassy. by qualified personnel required!
- Condition: new
HELLA | 6PU 230 048-161
£ 15,60
Condition: new
ABS sensor HELLA
- Fitting Position: Rear Axle
- Cable Length [mm]: 710
- Sensor Type: Active sensor
- Number of pins: 2
- Assy./disassy. by qualified personnel required!
- Condition: new
HELLA | 6PU 012 806-581
£ 41,55
Condition: new
ABS sensor HELLA
- Fitting Position: Front Axle Left
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Resistor to [Ohm]: 1210
- Resistor from [Ohm]: 990
- Voltage [V]: 12
- Number of mounting bores: 1
- Total Length [mm]: 67,4
- Assy./disassy. by qualified personnel required!
- Condition: new
HELLA | 6PU 009 106-091
£ 10,50
Condition: new
ABS sensor HELLA
- Fitting Position: Rear Axle
- Cable Length [mm]: 945
- Sensor Type: Active sensor
- Number of pins: 2
- Assy./disassy. by qualified personnel required!
- Condition: new
HELLA | 6PU 012 679-961
£ 27,81
Condition: new
ABS sensor HELLA
- Fitting Position: Rear Axle Right, Rear Axle Left
- Sensor Type: Hall Sensor
- Number of pins: 2
- Total Length [mm]: 38,5
- Assy./disassy. by qualified personnel required!
- Condition: new
HELLA | 6PU 012 806-931
£ 15,88
Condition: new
ABS sensor HELLA
- Fitting Position: Rear Axle Right
- Number of pins: 2
- Supplementary Article / Supplementary Info Info 2: without cable
- Voltage [V]: 12
- Number of mounting bores: 1
- Total Length [mm]: 77
- Assy./disassy. by qualified personnel required!
- Condition: new
HELLA | 6PU 012 039-041
£ 16,05
Condition: new
ABS sensor HELLA
- Fitting Position: Front Axle Right
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Resistor to [Ohm]: 1210
- Resistor from [Ohm]: 990
- Voltage [V]: 12
- Number of mounting bores: 1
- Total Length [mm]: 67,4
- Assy./disassy. by qualified personnel required!
- Condition: new
HELLA | 6PU 009 106-071
£ 10,60
Condition: new
