Steering knuckle for MITSUBISHI Lancer II Saloon (A171, A172, A174, A176) 2.0 Turbo ECi (A176) 170 HP
change
Select your vehicle
Here you can find 20 quality car parts, such as Steering knuckle for your MITSUBISHI Lancer II Saloon (A171, A172, A174, A176) 2.0 Turbo ECi (A176) 4G63-T (SOHC 8V) 125 kW from 03.1981
High quality car parts for your MITSUBISHI at low prices
Article No.: OE098/T10
More
- Spanner Size: 21 mm
- Thread Length [mm]: 19
- Spark Position [mm]: 1,5
- Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Thread Size: M14x1.25
- Electrode Gap [mm]: 0,6
- Product line: Powersport
- Connector type: SAE
- Required quantity: 4
- Packing Type: Box
- Quality/ Grade: Nickel GE
- Technical Information Number: RN4C
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8,65
- Packaging width [cm]: 2,45
- Packaging height [cm]: 2,45
- Resistor from [kOhm]: 6
- Resistor to [kOhm]: 15
- Condition: new
Read the product details
Article No.: 7090519
More
- Spanner Size: 20
- Thread Length [mm]: 19
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
- for OE number: 59622A
- Condition: new
Read the product details
Article No.: 7822
More
- Engine Code: 4G63T
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8 mm
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
- Thread Size: M14 x 1,25
- Condition: new
Read the product details
Article No.: 10-05-502
More
- Filter type: Spin-on Filter
- Diameter [mm]: 90
- Length [mm]: 81
- Internal Thread [mm]: M20 x 1,5
- Fitted Diameter [mm]: 63
- for OE number: MD322508
- Condition: new
Read the product details
Article No.: 686S0137P
More
- Engine Code: 4G63-T (SOHC 8V)
- Required quantity: 4
- Fuel Type: CNG/LPG
- Spanner Size: 20.6
- Thread Length [mm]: 19
- Spark Position [mm]: 3,3
- Spark Plug: 1 - Earthed Electrode, Iridium Middle Electrode, Nickel mass electrode
- Thread Size: M14x1,25
- Product line: Iridium
- Connector type: Solid SAE
- Diameter [mm]: 14
- Resistor [kOhm]: 6
- Country Specific Design: Japan
- Condition: new
Read the product details
Article No.: 1497
More
- Engine Code: 4G63T
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8 mm
- Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode
- Thread Size: M14 x 1,25
- Product line: LPG Laser Line
- Fuel Type: CNG/LPG
- Recommended change interval [km]: 60000
- Condition: new
Read the product details
Article No.: 6464
More
- Engine Code: 4G63T
- Electrode Gap [mm]: 0,8
- Spanner Size: 20,8 mm
- Thread Length [mm]: 19,0
- Spark Position [mm]: 3,0
- Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- Thread Size: M14 x 1,25
- Condition: new
Read the product details
Article No.: 51064
More
- Filter type: Spin-on Filter
- Height [mm]: 76
- Thread Size: M20x1.5
- Inner Diameter 2 [mm]: 63, 55
- Diameter [mm]: 82
- EU Product Safety Regulation (GPSR): IEC 60417-6183 mechanical expertise required
- Condition: new
Read the product details
Article No.: OP 617
More
- Filter type: Spin-on Filter
- Height [mm]: 75
- Thread Size: M20x1.5
- Inner Diameter 2 [mm]: 63, 55
- Diameter [mm]: 83
- EU Product Safety Regulation (GPSR): IEC 60417-6183 mechanical expertise required
- Condition: new
Read the product details
- Suspension Arm MITSUBISHI Lancer II Saloon (A171, A172, A174, A176) 2.0 Turbo ECi (A176) 170 hp
- Wheel Bearing MITSUBISHI Lancer II Saloon (A171, A172, A174, A176) 2.0 Turbo ECi (A176) 170 hp
- Anti Roll Bar Links MITSUBISHI Lancer II Saloon (A171, A172, A174, A176) 2.0 Turbo ECi (A176) 170 hp
- Ball Joint MITSUBISHI Lancer II Saloon (A171, A172, A174, A176) 2.0 Turbo ECi (A176) 170 hp
