Clutch plate for LAND ROVER Range Rover I 3.9 4x4 182 HP
change
Select your vehicle
Here you can find 20 quality car parts, such as Clutch plate for your LAND ROVER Range Rover I 3.9 4x4 35 D 134 kW from 11.1988
High quality car parts for your LAND ROVER at low prices
Article No.: 63
More
- Spanner Size: 21
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3,40
- Spark Plug: Control electrode gap, Interference Suppression, 1 - Earthed Electrode, with gasket seat
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 0,9
- Connector type: SAE/M4
- Weight [kg]: 0,07
- Resistor [kOhm]: 5
- Tightening torque from [Nm]: 20
- Tightening torque to [Nm]: 30
- Condition: new
Read the product details
Article No.: DM-045
More
- Fitting Position: Passenger Side, Driver side, Rear
- Matching Adapter: U-hook
- Length [mm]: 450
- Length [inch]: 18
- Wiper blade type: Standard
- Product line: Standard
- Weight [g]: 110
- for OE number: 8250A186
- Gross Weight [g]: 146
- alternative item: -
- Condition: new
Read the product details
Article No.: WUS450
More
- Fitting Position: Front, both sides
- Length [mm]: 450
- Wiper blade type: Bracket wiper blade
- Condition: new
Read the product details
Article No.: NF450
More
- Fitting Position: Driver side, Passenger Side
- Specification: Std Hook
- Length [mm]: 450
- Length [inch]: 18
- Fastening Type: Hook fixing
- Weight [g]: 93
- Condition: new
Read the product details
Article No.: SKWIB-0940217
More
- Fitting Position: Driver side, Passenger Side, Rear
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- not for country specific design: Great Britain
- Fitting Position: Front
- Length [mm]: 450
- Styling: without spoiler
- Quantity: 1
- Wiper blade type: Hybrid Wiper Blade
- Fastening Type: Hook fixing
- Condition: new
Read the product details
Article No.: 686S0310
More
- Construction Year from: 09/1989
- Fuel Type: CNG/LPG
- Supplementary Article / Supplementary Info Info 2: Electrode gap must be set for operation on gas
- Replace after km: 15000
- Required quantity: 8
- Spanner Size: 20,8
- External Thread [mm]: 14
- Thread Length [mm]: 19
- Spark Position [mm]: 3
- Thread Pitch [mm]: 1,25
- Electrode Gap [mm]: 0,8
- Tightening Torque [Nm]: 28
- Number of pins: 1
- Tightening angle [degrees]: 90
- Condition: new
Read the product details
Article No.: 2800011304280
More
- Fitting Position: Passenger Side, Driver side
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Matching Adapter: A
- Fitting Position: Front
- Length [mm]: 450
- Length [inch]: 18
- Styling: with spoiler
- Wiper blade type: Flat wiper blade
- Product line: AQUACTRL2
- Quantity Unit: Piece
- Similar to picture
- Condition: new
Read the product details
Article No.: PHB45K1
More
- Fitting Position: Driver side, Passenger Side
- Wiper blade type: Hybrid Wiper Blade
- Windscreen Wiper Length [mm]: 450
- Condition: new
Read the product details
Article No.: 50013052/3
More
- Filter type: Spin-on Filter
- Height [mm]: 142
- Thread Size: 3/4-16 UNF
- Inner Diameter 2 [mm]: 62
- Bypass Valve Opening Pressure [bar]: 1,2
- Height 1 [mm]: 152
- Supplementary Article / Supplementary Info Info 2: with one anti-return valve
- Diameter [mm]: 93
- Outer Diameter 2 [mm]: 72
- Condition: new
Read the product details
Article No.: 6428
More
- Fitting Position: Front Axle
- Wear Warning Contact: incl. wear warning contact
- Height [mm]: 73
- Width [mm]: 109,5
- Thickness [mm]: 18,3
- Test Mark: E4 90R 01115/906
- Vehicle Identification Number (VIN) to: FA399972
- Brake System: BREMBO
- Quantity Unit: Axle Set
- Condition: new
Read the product details
- Clutch Kit LAND ROVER Range Rover I 3.9 4x4 182 hp
- Clutch Cable LAND ROVER Range Rover I 3.9 4x4 182 hp
- Slave Cylinder LAND ROVER Range Rover I 3.9 4x4 182 hp
- Clutch Master Cylinder LAND ROVER Range Rover I 3.9 4x4 182 hp
- Clutch Release Bearing LAND ROVER Range Rover I 3.9 4x4 182 hp
- Flywheel LAND ROVER Range Rover I 3.9 4x4 182 hp
