Steering rack from LAUBER for MERCEDES-BENZ CLC
Rack and pinion LAUBER for all MERCEDES-BENZ CLC car models
CLC (CL203)
Best producers of high-quality Steering rack for MERCEDES-BENZ CLC
Other car parts for Steering
Track rod end
Inner tie rod
Tie rod
Steering rack boot
Power steering pump
Hydraulic oil
Choice of other autoparts from the Steering category for MERCEDES-BENZ CLC
C-Class
E-Class
A-Class
SPRINTER
VITO
S-Class
M-Class
B-Class
SLK
CLS
GLC
CLK
SL- GLA
CLA
190
124-Series
Most wanted products in Steering rack LAUBER for your MERCEDES-BENZ CLC
Steering rack LAUBER
- Operating Mode: Hydraulic
- Internal Thread [mm]: M16 x 1.5mm MALE
- Exchange Part
- Overall Length [mm]: 1040
- Number of Teeth: 54
- Number of Teeth on input shaft: 54
- Manufacturer Restriction: ZF
- Input shaft height [mm]: 40
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M16x1,5
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.0922
£ 381,15
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Exchange Part
- Condition: Remanufactured
LAUBER | 66.2929
£ 281,06
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Vehicle Equipment: for vehicles without servotronic steering
- Observe service information
- Exchange Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1175
- Input shaft height [mm]: 60
- Axle Joint Thread Size: M14x1,5
- Number of Teeth on input shaft: 54
- Connector type: wielorowek
- Condition: new
LAUBER | 66.0018
£ 442,92
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Condition: new
LAUBER | 66.9211
£ 172,15
Condition: new
Steering rack LAUBER
- Operating Mode: Hydraulic
- Condition: Remanufactured
LAUBER | 66.2922
£ 298,66
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Steering Gear Type: Rack and Pinion Steering Gear
- Overall Length [mm]: 1160
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Input shaft height [mm]: 35
- Axle Joint Thread Size: M14x1,5
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.9933
£ 354,65
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Vehicle Equipment: for vehicles without servotronic steering
- Pressure Line Connection Thread Size: M16x1.5
- Backflow Connector Thread Size: M18x1.5
- Observe technical data
- Condition: Remanufactured
LAUBER | 66.0927
£ 287,07
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Exchange Part
- Vehicle Equipment: for vehicles with servotronic steering
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Overall Length [mm]: 1130
- Input shaft height [mm]: 25
- Axle Joint Thread Size: M14x1,5
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.9931
£ 269,25
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Exchange Part
- Overall Length [mm]: 1125
- Input shaft height [mm]: 30
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M14x1,5
- Number of Teeth on input shaft: 54
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.2770
£ 346,95
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Exchange Part
- Vehicle Equipment: for vehicles with servotronic steering
- Overall Length [mm]: 1130
- Input shaft height [mm]: 30
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Axle Joint Thread Size: M14x1,5
- Number of Teeth on input shaft: 54
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.1770
£ 299,64
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Exchange Part
- Axle Joint Thread Size: M14x1,5
- Overall Length [mm]: 1210
- Input shaft height [mm]: 25
- Number of Teeth on input shaft: 54
- Connector type: wielorowek
- Steering Gear Type: Rack and Pinion Steering Gear
- Condition: Remanufactured
LAUBER | 66.3729
£ 284,83
Condition: Remanufactured
Steering rack LAUBER
- Operating Mode: Hydraulic
- Exchange Part
- Axle Joint Thread Size: M14x1,5
- Overall Length [mm]: 1125
- Input shaft height [mm]: 25
- Number of Teeth on input shaft: 54
- Connector type: wielorowek
- Condition: Remanufactured
LAUBER | 66.9930
£ 290,61
Condition: Remanufactured
